Operating The Display Using The Sw-En600-L Switch Unit; System Errors/Warnings - Orbea Blue Paper Rise Carbon 2023 Manual Tecnico

28 | ORBEA
FINE TUNE (example)
· FINE TUNE: Up to 15 levels of assist can be selected
Each level is activated within a preset assist character,
and the maximum and minimum motor torque can be
the remote control (green light on LED 2).
TECHNICAL MANUAL
LED 2
X OFF > ECO > TRAIL 1 > TRAIL 2
BOOST
> TRAIL 3 > BOOST
TRAIL 3
TRAIL 2
TRAIL 1
ECO
No assist
Y
BOOST > TRAIL 3 > TRAIL 2 > TRAIL 1 > ECO > OFF
and assist levels.
found at the following link:
BLUE PAPER RISE CARBON · 2023
OP ERAT ING T HE DISPLAY USING
THE SW-EN 60 0-L SW ITC H UNIT
It is possible to browse through the SC-EN600 display
using the SW-EN600-L switch unit. Use the A button on
the remote control to browse through the different dis-
2 can be selected via the display. In assemblies without
SC-EN600 display can be found here:
https://si.shimano.com/es/manual/search?input_mod-
el=sc-en600
SYSTEM ERRORS/WA RNINGS
When an error or warning is detected in the system, LED 1
EN600 displays, the error or warning code will be shown
on the display.
Restart the bicycle and connect it to the Shimano Etube
can be seen in the Maintenance>Error Log section.
-
LED 2
ORBEA | 29
A
information about error codes and their solutions. See the
system and their resolution methods at the following link:
EN