7 Shimano Etube Project Cyclist; Customisation Of The Electrical Assist System - Orbea Blue Paper Rise Carbon 2023 Manual Tecnico

30 | ORBEA
0 7 SHIMANO ETUBE
P R OJE CT CYC L I ST
CUSTOMISATION OF THE
ELECTRICAL ASSIST SYSTEM
of the assist levels so that you can adjust the system
to your needs.
els can be customised independently using the Shimano
· BASIC:
assist and maximum torque characteristics of each level
· FINE TUNE: Up to 15 levels of assist can be selected
Each level is activated within a preset assist character,
and the maximum and minimum motor torque can be
two levels onwards will be visible as TRAIL on the re-
mote control (green light on LED 2). See the "Changing
the assist level" section of this manual.
ject app also provides you with functions such as the cus-
tomisation of remote controls, generation of error reports,
TECHNICAL MANUAL
1. Open Etube Project on your smartphone.
-
Turn on the bicycle and open the app on your phone.
2. Select Register Ebike.
3. Select the unit to be paired.
If the unit is not visible on the display after a few se-
-
conds, press one of the buttons on the assist level chan-
ge switch to activate the connection.
4. Register your bicycle in Etube Project.
You can choose a password so that only you can make
changes to your bicycle. If you do not wish to change
the password, continue to the next step.
5. Select the "Assist" option in the Customise tab.
6. Change the maximum torque and assist characteris-
See the method for creating and customising assist pro-
-
ke_settings
connected from the app will be the one that is selected
on the app's display when exiting the app.
BLUE PAPER RISE CARBON · 20 2 3
2
-
-
5
ORBEA | 31
4
3
6 7
E N