Orbea BLUE PAPER RISE CARBON 2023 Manual Tecnico página 22

42 | ORBEA
CUSTOMISATION OF THE DATA FIELDS
The order in which system data are displayed on the com-
patible device's Toolbox screen can be customised through
Garmin Express or the Garmin Connect mobile app.
1. Open Garmin Connect on your smartphone and con-
nect your device.
2. Access your device through the app and browse to the
Orbea RS Toolbox Settings menu:
Settings
3. Select which data you want to see in each Orbea Tool-
4. Go back to the app's main screen and select Synchro-
nise now.
When you reconnect your device to your bicycle, you
will see that the data are organised according to your
saved settings.
If the device was connected to your bicycle when you
saved the changes, you will see the new settings imme-
diately.
TECHNICAL MANUAL BLUE PAPER RISE CARBON · 20 2 3
GARMIN EXPRESS (PC AND MAC)
Connect your device to your computer using the cable
and go to Installed Apps. Click on the Orbea RS Toolbox
Settings button and select the data you want to view in
Save the changes and synchronise the device.
CONNECTION TO ANOTHER BICYCLE
Once RS Toolbox is installed and visible on your device,
1. Open Garmin Connect on your smartphone and con-
nect your device.
2. Access your device through the app and browse to the
Orbea RS Toolbox Settings menu:
Settings
3.
the changes.
4. Go back to the main Connect screen and synchronise
your device.
5.
following the steps described at the start of this section.
You will need to perform this process when you want to
connect your device to a different bicycle.
If pairing does not work with the new bicycle, uninstall
Toolbox and reinstall it through the Garmin Connect
app before trying to pair the new bicycle again. It may
-
ORBEA | 43
E N