Attaching The Pedi-Mate; Infant Restraint System - Stryker Performance-Pro Xt Manual De Uso Y Mantenimiento

English

ATTACHING THE PEDI-MATE

See the Pedi-Mate
Pedi-Mate ®

Infant Restraint System .

To secure the Pedi-Mate
1 . Remove any restraints that are already attached to the cot .
2 . Raise the cot backrest to the full upright position .
3 . Position the Pedi-Mate
4 . Wrap the straps around the backrest and insert the ends of the straps through the brackets . Securely fasten the
buckle (see Figure 56) .
WARNING
To avoid accidental release of the Pedi-Mate
from obstructions on the cot or accessories .
Return To Table of Contents
1-48
Optional Accessories
® INFANT RESTRAINT SYSTEM
users manual for the manufacturer's recommendations for the use, operation and care of the
®
to the cot:
®
® pad flat on the backrest with the black backrest straps out (see Figure 55) .
Figure 55: Positioning the Pedi-Mate
Figure 56: Fastening the Pedi-Mate
® , and possible injury to the infant, ensure that the buckle is located away
®
Buckle
®
6086-009-005 REV A www.stryker.com