Stryker Performance-PRO XT Manual De Uso Y Mantenimiento página 9

SPECIFICATIONS
Safe Working Load
Note: Safe Working Load indicates the sum of
the patient mattress and accessory weight .
Backrest Articulation/Shock Position
Overall Length/Minimum Length/Width
Height 1
Weight
2
Caster Diameter/Width
Minimum Operators Required for an Occupied Cot
Minimum Operators Required for an Unoccupied Cot
Recommended Fastener Systems
Maximum Loading Height
3
Single Wheel Lock / Double Wheel Lock
Height is measured from the bottom of the mattress at seat section to ground level .
1
2 Cot is weighed without mattress and restraints .
3 Load wheel height can be set between 27 .25" (69,2 cm) and 34" (86,4) .
Stryker reserves the right to change specifications without notice .
The Performance-PRO™ XT is designed to conform to the Federal Specification for the Star-of-Life Ambulance (KKK-A-1822) .
The Performance-PRO™ XT is designed to be compatible with competitive cot fastener systems .
Patents pending .
The yellow and black color scheme is a proprietary trademark of Stryker Corporation.
www.stryker.com
Introduction
Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7 (LOW)
Position 8 (MID)
Position 9 (HIGH)
6086-009-005 REV A
700 pounds 317,5 kg
0° to 73° / +15°
80" / 64" / 23" 203,2 cm / 162,6 cm / 58,4 cm
13 .8" 35,1 cm
22" 55,9 cm
25 .8" 65,5 cm
28 . 1 " 71,4 cm
31 .9" 81 cm
34 .6" 87,9 cm
37 .3" 94,7 cm
40" 101,6 cm
42 .2" 107,2 cm
89 lb 40,37 kg
6" / 2" 15,2 cm / 5,1 cm
2
1
Model 6370 or 6377 Floor Mount Type
Model 6371 Wall Mount Type
Up to 34" Up to 86,4 cm
Optional
Return To Table of Contents
1-5
English