Cot Fastener Installation - Stryker Performance-Pro Xt Manual De Uso Y Mantenimiento

Cot Fastener Installation

English
Note: The Cot Fastener Installation instructions on page 1-13 through page 1-18 are intended for cots that you will
NOT use with Power-LOAD . For Model 6086 cots with the Power-LOAD option, see the Power-LOAD Operations/
Maintenance Manual for installation instructions .
The Stryker Cot Fastener Systems are designed to be compatible only with cots which conform to the installation
specifications listed on page 1-14 .
WARNING
It is the responsibility of the cot operator to ensure that the cot being used in the Stryker Cot Fastener Systems meets the
installation specifications listed on page 1-14 . Injury may result if a non-compatible cot is used in the Stryker Fastener
System .
Note: Adjustment of the rail clamp assembly may be required in order to compensate for any variation in the cot
retaining post position depending on the cot manufacturer and model number .
For more information about the Stryker Cot Fastener Systems, see the Cot Fastener Operations/Maintenance Manual .
Return To Table of Contents
www.stryker.com 6086-009-005 REV A 1-13