Loading Or Unloading The Cot With The Power-Load Option - Stryker Performance-Pro Xt Manual De Uso Y Mantenimiento

Ocultar thumbs Ver también para Performance-PRO XT:

LOADING OR UNLOADING THE COT

The cot loading and unloading instructions on

with Power-LOAD . For Model 6086 cots with the Power-LOAD option, see the Power-LOAD Operations/Maintenance

Manual for loading and unloading instructions .

LOADING OR UNLOADING THE COT WITH THE POWER-LOAD OPTION

The Model 6086 Performance-PRO™ XT cot is fully compatible with the Model 6390 Power-LOAD system if it is

ordered with the Power-LOAD option or compatibility kit .

For more information about using your Power-LOAD compatible cot, see the Power-LOAD Operations/Maintenance

• Power-LOAD is designed to be compatible with the 6085/6086 Performance-PRO XT, 6500/6506 Power-PRO XT,

and 6510/6516 Power-PRO IT cots with the Power-LOAD option only . In certain situations, you can use Power-

LOAD as a standard antler for most X-frame cots, but a rail clamp assembly is required for all cots without the

Power-LOAD option .

• It is the responsibility of the cot operator to ensure that the cot being used in the Stryker Model 6390 Power-LOAD

system is a Power-LOAD compatible cot . Injury may result if a non-compatible cot is used in the Stryker Model

6390 Power-LOAD system .

www.stryker.com

Operation Guide

6086-009-005 REV A

are intended for cots that you will NOT use

Return To Table of Contents