Switching On The System - Franka Robotics Production 3 Guía Rápida De Instalación

See relevant product manual at paragraphs:
Wiring and Electrical Inst., Switching On, Correct Inst. Site
DANGER!
Electrical shock
Short circuit due to developed condensation when the device is transported
from colder to warmer and more humid surroundings. Risk of life-
threatening injuries due to electrical shock.
• Leave devices to acclimatize after transport.
• Do not switch on wet devices.
DANGER!
Damaged wires or inadequate electrical installation
Risk of personal injury by electric shock, as well as material damage.
• Only use the system in sound technical condition.
• Only have the emergency stop system installed by qualified personnel.
• Check cables and electrical installations.
CAUTION!
Exposed wires and cables
Operators may trip and fall due to exposed wires and cables in the working
space.
• Always lay cables safely.

Switching on the system

Precondition:
• Cables need to be plugged in correctly.
• The external power supply must be connected (A).
• The knob of the Emergency Stop Device needs to be pulled up (B).
• Leave the maximum space (see paragraph "Correct Installation Site" in
product manual).
Procedure:
• Switch on the Control. The status lights will flash white (C).
Copyright © Franka Robotics