Franka Robotics PRODUCTION 3 Guía Rápida De Instalación página 12

See relevant product manual at paragraphs:
Unpacking the Equipment, Positioning the Control
WARNING!
Heavy equipment
Due to the dead weight and partly due to the geometric design, lifting and
handling the equipment may cause back injury and, if it falls, serious injury
to fingers, hands, toes, and feet.
• When transporting, mounting, or demounting the equipment, always
wear personal protective equipment (e.g., safety shoes).
• Always lift the equipment with the help of a second person.
• The equipment must be placed on even surfaces to prevent it from
tilting or sliding.
• Follow the existing company regulations on lifting loads and personal
protective equipment.
NOTICE
Allowed mains frequency: 50 - 60 Hz
Supply voltage: 100 - 240 VAC
Unpacking and placing the Control
• Carefully open the box by removing the sealing adhesive strips on top
of the cardboard box.
• Open the foil coating.
• Remove the power cable and top lid (A).
• Remove the top protective layer (B).
• Grasp the Control at the indicated grasping positions and carefully lift it
out of the bottom protective layer and set it aside (C).
• Remove the foam packaging from the Control.
• Place the Control horizontally in its designated position, or attach it to a
rack designed for 19" units.
Copyright © Franka Robotics