IKEA LAGAN Manual De Instrucciones página 62

Part No.:A17725409
Part No.:7 7 2 2 2
A17725410
62
NOTE: IT IS
NOTE: IN THE BEFORE REAR WALL READ AND FOLLOW TEMPLATE. INSTALLATION PROCEEDING WITH THIS THE DIRECTIONS VERY IMPORTANT INSTRUCTIONS TO
READ AND IN THE BEFORE REAR WALL FOLLOW INSTALLATION PROCEEDING IT IS WITH THIS THE DIRECTIONS VERY IMPORTANT TO INSTRUCTIONS This Rear 2. Locate 1. Use mounting outlet. to check a level and to accurately. Wall Template plate that the locate serves to position the horizontal the bottom exhaust 12" 3/8" TO EDGE
This Rear 1. Use outlet. mounting TEMPLATE. plate and a level Wall Template serves to locate to position the horizontal exhaust the bottom 12" 3/8" TO EDGE of the  locations screw and mark mounted side of microwave. firmly It is right important at least the centerline. to use in a stud at least template one stud on the is positioned one wood left or 4"   
screw mounted  2. Locate and mark accurately. right side It is important to check that the to use centerline. of the at least one stud template on the left or is positioned 4"     3. Drill bolts. toggle not line that do drill a stud, holes for the hole for up with a 3/16" marked in the supplied Mark two to support additional, toggle bolts. locations. wood screws. a stud, For holes evenly the weight Where spaced there is    Trim the rear wall template along
3. Drill locations of the a stud, for the holes in microwave. drill a firmly that do not line the marked 3/16" hole Mark two in a stud supplied locations. to support at least additional, toggle bolts. the weight one wood evenly spaced Where there    Trim the rear wall template along the dotted AT THIS 5. Review 4. Remove the template INSTALL DO NOT the Installation installation TIME. situation. from the THE MOUNTING Instruction rear wall. PLATE drill 5/8" holes for  the dotted line.
5. Review  AT THIS 4. Remove toggle the template DO NOT bolts. TIME. the Installation up with THE MOUNTING INSTALL from the PLATE for wood a stud, drill 5/8" For holes screws. holes for is  line. Darle vuelta versión en Español. a la hoja para consultar la book for your
Darle vuelta versión a la hoja installation situation. rear wall. Instruction your book for 
en Español. para consultar la  mounting IMPORTANT: Locate and mark plate. holes to align with holes     
Locate and mark   SPACED MARK THE THE CENTERLINE. LOCATE LOCATION AT LEAST ONE STUD ON EITHER SIDE OF in the    
mounting LOCATE IMPORTANT: plate. AT LEAST holes to align with holes in the       AREA. TOGGLE BOLTS FOR 2 MOUNTING ADDITIONAL, IN THE EVENLY PLATE 
AREA. SPACED THE CENTERLINE. MARK THE LOCATION TOGGLE BOLTS FOR 2 ONE STUD ADDITIONAL, ON EITHER SIDE OF   Trim the rear wall  
MOUNTING IN THE EVENLY PLATE  template along the dotted line.
Trim the rear wall template  
along the dotted line.  mounting Locate plate. and mark holes to align
 MARK THE IMPORTANT: LOCATE THE CENTERLINE. AT LEAST ONE STUD ON EITHER with holes in the
Locate IMPORTANT: mounting plate. and mark holes to align with holes in the  SPACED AREA. LOCATION TOGGLE FOR 2 BOLTS IN THE ADDITIONAL, MOUNTING PLATE EVENLY SIDE OF
 THE CENTERLINE. MARK THE LOCATE SPACED AT LEAST LOCATION ONE STUD FOR 2 ON EITHER SIDE OF
 AREA. TOGGLE BOLTS IN THE MOUNTING ADDITIONAL, PLATE EVENLY 



FR
Imprimé en Chine