IKEA RAGLANDA Manual Del Usuario página 57

DELAY
will begin counting down. will begin counting down.
the selected wash cycle will be increased. the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE
The start time of the program may be delayed for a period
appears on the display; each time you press the button, appears on the display; each time you press the button,
ENGLISH ENGLISH
switches off and the wash cycle begins. switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer of time between 1 and 12 hours. button and within 4 seconds close the door: the timer
DELAY the time (1h, 2h, etc. up to max. 12h) from the start of DELAY the time (1h, 2h, etc. up to max. 12h) from the start of
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
will begin counting down. will begin counting down.
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased. the selected wash cycle will be increased.
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
ENGLISH
DEUTSCH
2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE appears on the display; each time you press the button,
of time between 1 and 12 hours. of time between 1 and 12 hours.
repeatedly until the selected delayed start indicator light repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins. switches off and the wash cycle begins.
DELAY DELAY
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
«h» switches off. «h» switches off.
1. Press the DELAY button: the corresponding «h» symbol To adjust the delay time and select a shorter period of time, 1. Press the DELAY button: the corresponding «h» symbol To adjust the delay time and select a shorter period of time,
the selected wash cycle will be increased.
The start time of the program may be delayed for a period will begin counting down. The start time of the program may be delayed for a period will begin counting down.
The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
appears on the display; each time you press the button, appears on the display; each time you press the button,
of time between 1 and 12 hours. 3. Once this time has elapsed, the indicator light «h» of time between 1 and 12 hours. 3. Once this time has elapsed, the indicator light «h» 2. Select the wash program, press the START/PAUSE
DELAY DELAY
has been started. has been started.
repeatedly until the selected delayed start indicator light repeatedly until the selected delayed start indicator light
the time (1h, 2h, etc. up to max. 12h) from the start of the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins. switches off and the wash cycle begins.
1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol
«h» switches off. the selected wash cycle will be increased. «h» switches off. the selected wash cycle will be increased.
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
will begin counting down.
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
Programmtabelle
appears on the display; each time you press the button, appears on the display; each time you press the button,
The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
of time between 1 and 12 hours. 2. Select the wash program, press the START/PAUSE of time between 1 and 12 hours. 2. Select the wash program, press the START/PAUSE
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button 3. Once this time has elapsed, the indicator light «h»
DELAY
the time (1h, 2h, etc. up to max. 12h) from the start of the time (1h, 2h, etc. up to max. 12h) from the start of
has been started. has been started.
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
1. Press the DELAY button: the corresponding «h» symbol repeatedly until the selected delayed start indicator light 1. Press the DELAY button: the corresponding «h» symbol repeatedly until the selected delayed start indicator light
The start time of the program may be delayed for a period the selected wash cycle will be increased. the selected wash cycle will be increased.
will begin counting down. will begin counting down.
To adjust the delay time and select a shorter period of time,
«h» switches off. appears on the display; each time you press the button, «h» switches off. appears on the display; each time you press the button,
of time between 1 and 12 hours. 2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
The DELAY function cannot be set once a wash cycle the time (1h, 2h, etc. up to max. 12h) from the start of press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
Program Program
1. Press the DELAY button: the corresponding «h» symbol switches off and the wash cycle begins. switches off and the wash cycle begins.
Programm
repeatedly until the selected delayed start indicator light
has been started. the selected wash cycle will be increased. has been started. the selected wash cycle will be increased.
will begin counting down. will begin counting down.
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
appears on the display; each time you press the button,
«h» switches off.
2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
the time (1h, 2h, etc. up to max. 12h) from the start of
The DELAY function cannot be set once a wash cycle
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
switches off and the wash cycle begins. switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light the selected wash cycle will be increased. repeatedly until the selected delayed start indicator light
Program Program
has been started.
will begin counting down. will begin counting down.
Eco Eco
1 1
1 Eco To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
«h» switches off. «h» switches off.
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins. switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light repeatedly until the selected delayed start indicator light
Conventional Conventional
has been started. has been started.
will begin counting down.
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
2 2
Program Program
«h» switches off. Eco «h» switches off. Eco
1 1
2 Auto
wash and dry wash and dry
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light repeatedly until the selected delayed start indicator light
has been started. has been started.
To adjust the delay time and select a shorter period of time, Conventional Conventional
Intensive Intensive
3 3
«h» switches off. «h» switches off.
Program
2 2
press the DELAY button. To cancel it, press the button
wash and dry Eco wash and dry Eco
1 1
3 Intensiv
The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
repeatedly until the selected delayed start indicator light
has been started. has been started.
Fast Fast
4 «h» switches off. 4
Program Program
Intensive Intensive
3 Conventional 3 Conventional
4 Schnell Spülen
The DELAY function cannot be set once a wash cycle
2 2 Eco
1
wash and dry wash and dry
30'
has been started.
Sanitizing Sanitizing
5 5 Program Program
Fast Fast
4 4
5 Schnell Spülen
Conventional
Eco Eco
1 Intensive 1 Intensive
3 3
2
und Trocknen wash and dry
Pre-Wash Pre-Wash
6 6 Program Program
Sanitizing Sanitizing
5 5
Conventional Conventional
Eco Eco
1 Fast 1 Fast
6 Glas 4 4
2 2
Intensive
3
wash and dry wash and dry
Program
7 Self-Clean 7 Self-Clean
Pre-Wash Pre-Wash
6 Conventional 6 Conventional
Eco Eco
1 1
7 Leise
Sanitizing Sanitizing
5 2 2 5
3 Intensive 3 Intensive
Fast
4
wash and dry wash and dry
Conventional Self-Clean Self-Clean Conventional
7 7
1 Eco
8 Hygiene
2 Pre-Wash 2 Pre-Wash
6 Intensive 6 Intensive
3 Fast 3 Fast
4 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. 4 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. Sanitizing
5
wash and dry wash and dry
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Conventional
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
9 Vorspülen
2
Intensive Intensive
3 Self-Clean Fast 3 Fast Self-Clean
4 7 Sanitizing 7 4 Sanitizing
5 5 Pre-Wash
6
wash and dry
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously. Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following *) Not all options can be used simultaneously. Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
10 Selbstreinigung
3 address: dw_test_support@whirlpool.com Intensive address: dw_test_support@whirlpool.com
Fast Fast
4 Sanitizing 4 Sanitizing
5 **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many Pre-Wash 5 **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many Pre-Wash
6 6 Self-Clean
7
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs. factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Die ECO-Programmdaten sind Labormessdaten, die gemäß der europäischen Norm EN 60436:2020 erfasst wurden.
Fast
4 Sanitizing Sanitizing
5 Pre-Wash 5 Pre-Wash
6 Self-Clean 6 Self-Clean
7 7
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Hinweis für Prüflabore: Für Informationen zu Vergleichs-EN-Testbedingungen senden Sie bitte eine E-Mail an die folgende Adresse:
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
dw_test_support@whirlpool.com
load, load balancing, additional selected options and sensor calibration. Sanitizing load, load balancing, additional selected options and sensor calibration. Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
5 Pre-Wash Pre-Wash
6 6
7 *) Not all options can be used simultaneously. Self-Clean 7 *) Not all options can be used simultaneously. Self-Clean
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
Eine Vorbehandlung des Geschirrs ist vor keinem Programm erforderlich.
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
*) Nicht alle Optionen können gleichzeitig verwendet werden
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Pre-Wash
6 Self-Clean Self-Clean
**) Die für andere Programme als das Eco-Programm angegebenen Werte sind nur Richtwerte. Die aktuelle Zeit kann auf Grundlage von 7 7
*) Not all options can be used simultaneously.
PROGRAMS DESCRIPTION load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration. PROGRAMS DESCRIPTION
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
mehreren Faktoren, wie Temperatur und Druck des eintretenden Wassers, Raumtemperatur, Spülmittelmenge, Menge und Art der Beladung,
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
Lastausgleich, zusätzlich gewählte Optionen und Sensoreichung variieren. factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Self-Clean
7
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
load, load balancing, additional selected options and sensor calibration.
1. ECO - Das Eco-Programm eignet sich zum Reinigen von normal verschmutztem Geschirr und ist für diese Verwendung hinsichtlich
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. PROGRAMS DESCRIPTION ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
des Wasser- und Stromverbrauchs das effektivste Programm zur Einhaltung der EU-Ökodesign-Rechtsvorschriften.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
2. Auto - Für normal verschmutztes Geschirr mit trockenen Speiseresten. Erfasst den Grad der Verschmutzung auf dem Geschirr und
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
PROGRAMS DESCRIPTION
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
passt das Programm entsprechend an. Wenn der Sensor den Grad der Verschmutzung erfasst, wird im Display eine Animation
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
angezeigt und die Programmdauer wird aktualisiert.
address: dw_test_support@whirlpool.com
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
Pre-treatment of the dishes is not needed before any of the programs.
3. INTENSIV - Für sehr schmutziges Geschirr empfohlen, besonders geeignet für Töpfe und Pfannen (nicht für empfindliches Geschirr
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
*) Not all options can be used simultaneously.
verwenden).
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
4. SCHNELL SPÜLEN 30' - Programm ideal für eine halbe Beladung mit leicht verschmutztem Geschirr ohne getrocknete Speisereste. Es
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
umfasst keinen Trockengang.
load, load balancing, additional selected options and sensor calibration.
5. SCHNELLE SPÜLEN UND TROCKNEN - Normal verschmutztes Geschirr. Täglicher Zyklus, der optimale Reinigungs- und PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Trockenleistung in kürzester Zeit garantiert.
6. GLAS - Ein Programm für empfindliches Geschirr, das empfindlicher auf höhere Temperaturen reagiert, wie Gläser und Tassen.
PROGRAMS DESCRIPTION
7. LEISE - Geeignet für den Nachtbetrieb des Gerätes. Garantiert optimale Reinigungs- und Trockenleistung bei niedrigstem Lärmpegel.
8. HYGIENE - Normal oder stark verschmutztes Geschirr mit zusätzlichem antibakteriellem Spülgang. Kann für die Wartung des
Geschirrspülers verwendet werden.
9. VORSPÜLEN - Verwendet, um Geschirr einzuweichen, das später gespült werden soll. Für dieses Programm wird kein Spülmittel
verwendet.
10. SELBSTREINIGUNG - Programm, das für die Pflege des Geschirrspüler zu verwenden ist. Es ist nur bei LEEREM Geschirrspüler und
mit speziellen Reinigungsmitteln für die Pflege des Geschirrspülers auszuführen.
Ein laufendes Programm ändern
Wenn ein falsches Programm ausgewählt wurde, kann es geändert werden, wenn es gerade erst gestartet wurde: die Tür öffnen, die EIN/AUS-
Taste drücken und gedrückt halten, um die Maschine auszuschalten. Die Maschine mit der EIN/AUS-Taste wieder einschalten und das neue
Spülprogramm und die gewünschten Optionen auswählen; das Spülprogramm durch Drücken der Taste START/Pause starten und innerhalb
von 4 Sek. die Tür schließen. Dauert es mehr als 4 Sekunden unterbricht das Gerät automatisch und Sie müssen das Gerät durch Wiederholen
des letzten Schrittes erneut starten.
Hinzufügen von weiterem Geschirr
Ohne die Maschine auszuschalten, die Tür öffnen (START/Pause LED beginnt zu blinken) (Vorsicht HEISSER Dampf!) und das Geschirr in den
Geschirrspüler geben. Die Taste START/Pause drücken und innerhalb von 4 Sek. die Tür schließen; das Programm läuft automatisch weiter, wo
es unterbrochen wurde.
Unbeabsichtigtes Unterbrechen des Spülprogramms
Wird während des Spülgangs die Gerätetür geöffnet, oder sollte ein Stromausfall stattfinden, wird der Spülgang unterbrochen. Die Taste START/
Pause drücken und innerhalb von 4 Sek. die Tür schließen; das Programm läuft automatisch weiter, wo es unterbrochen wurde.
Available
options
Funktionen (*)
Available
50° 50°
options
50°
Available
55° 55°
50° 50°
50°-60°
options
65° 65° - -
55° 55°
50° 50°
65°
Available
- -
50° 50° - -
65° 65° - -
options
55° 55°
50°
50° –
Available
65° 65° - -
- -
50° 50° - -
options
50° 65° 50° 65° - -
50°
55°
Available
- -
- - - -
65° 65° - -
options
50° 50° - -
50° 50° - -
45° 55° 55°
65° -
Available
- -
65° 65° - -
- -
- - - -
options
50° 50°
50°
65° 55° 65° 55° - -
-
65° 65° - -
50° -
- -
65° 65° - -
50°
65° –
55° 55° - -
- - - - - -
65° 65° - -
50° 50° - -
65° -
– 55° – –
- -
65° 65° - - - -
65° 50° 50° 65° - - - -
65° 65° - -
- - -
65° – –
- -
65° -
50° 50° - -
65° 65° - - - -
- - - - -
65° -
-
50° -
65° 65° - - - -
- - - - - -
65° 65° - -
65° -
- - - - - -
- -
65° 65° - -
-
- - - -
65° 65° - -
-
65° -
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec-
NaturalDry
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
button (6 sec). button (6 sec).
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is which automatically opens the door during/after drying phase to
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
NaturalDry NaturalDry
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec- ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec-
E E d d
– enabled – enabled – disabled – disabled
button (6 sec). button (6 sec).
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
NaturalDry NaturalDry
press and hold press and hold button (3 sec). button (3 sec).
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
1. Go to the Dishwasher software menu pressing and holding added together with the dishwasher. To see how to mount protec- 1. Go to the Dishwasher software menu pressing and holding
E E d d
Door opening system NaturalDry is a convection drying system – enabled Door opening system NaturalDry is a convection drying system – enabled – disabled – disabled
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
button (6 sec). tion foil please refer to (INSTALLATION GUIDE). button (6 sec).
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
2. You switched to NaturalDry Control Menu, you could change NaturalDry NaturalDry 2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
press and hold press and hold button (3 sec). button (3 sec).
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec-
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
E E d d
– enabled button (6 sec). – enabled – disabled – disabled
Duration of Duration of
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
NaturalDry
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
Dauer des
To confirm the change and exit from the Control Menu please 2. You switched to NaturalDry Control Menu, you could change To confirm the change and exit from the Control Menu please
ensure exceptional drying performance every day. Door opens at Available ensure exceptional drying performance every day. Door opens at wash pro- wash pro-
Verfügbare
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec-
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
consumption
press and hold press and hold button (3 sec). button (3 sec).
Door opening system NaturalDry is a convection drying system status of NaturalDry functionality by pressing Spülprogamms
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
options gram gram
tion foil please refer to (INSTALLATION GUIDE). *) tion foil please refer to (INSTALLATION GUIDE). *)
button (6 sec). button (6 sec).
E d
(litres/cycle)
which automatically opens the door during/after drying phase to – enabled – disabled
(h:min)**)
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
Duration of Duration of
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows: (h:min) (h:min)
**) **)
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
To confirm the change and exit from the Control Menu please
ensure exceptional drying performance every day. Door opens at
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec-
Available wash pro- wash pro-
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
press and hold button (3 sec).
the temperature that is safe to your kitchen furniture. consumption
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
button (6 sec). button (6 sec). 2:45 2:45
E options E gram d gram d
– enabled *) – enabled *) – disabled – disabled
As additional steam protection, special designed protection foil is
(litres/cycle)
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
(h:min) (h:min)
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
Duration of Duration of **) **)
added together with the dishwasher. To see how to mount protec-
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
press and hold press and hold button (3 sec). button (3 sec).
Available wash pro- wash pro-
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec). button (6 sec).
E E d d
2:00 2:00
– enabled – enabled – disabled – disabled consumption
2:45 2:45
1:25 - 3:00
NaturalDry functionality could be disabled by the user as follows:
options gram gram
2. You switched to NaturalDry Control Menu, you could change *) 2. You switched to NaturalDry Control Menu, you could change *)
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
(litres/cycle)
Duration of
1. Go to the Dishwasher software menu pressing and holding
(h:min) (h:min)
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
**) **)
press and hold press and hold button (3 sec). button (3 sec).
Available wash pro-
button (6 sec).
E E d d
– enabled – enabled – disabled – disabled
2:30 2:30
2:00 2:00
2. You switched to NaturalDry Control Menu, you could change
options gram
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please *)
2:45 2:45
Duration of Duration of
status of NaturalDry functionality by pressing
press and hold press and hold button (3 sec). (h:min) button (3 sec).
**)
Available wash pro- wash pro-
E d
– enabled – disabled
0:55 0:55
consumption
2:30 2:30
options gram gram
*) *)
To confirm the change and exit from the Control Menu please
2:00 2:00
2:45
Duration of Duration of
(litres/cycle)
press and hold (h:min) button (3 sec). (h:min)
**) **)
Available wash pro- wash pro-
1:40 1:40
consumption
0:55 0:55
options gram gram
*) *)
2:45 2:30 2:30 2:45
Duration of Duration of
2:00 (litres/cycle)
(h:min) (h:min)
**) **)
Available wash pro- wash pro-
0:10 0:10
consumption
1:40 1:40
options gram gram
*) *)
2:45 2:45
Duration of 0:55 0:55
2:00 2:00
(litres/cycle)
2:30
(h:min) (h:min)
**) **)
wash pro-
0:50 0:50 consumption
0:10 0:10
gram
*)
2:45 2:45
2:00 1:40 2:00 1:40 (litres/cycle)
2:30 2:30
0:55
(h:min)
**)
0:50 0:50
2:45
2:00 2:00
0:10 0:10
2:30 2:30
0:55 0:55
1:40
2:00
2:30 2:30
0:55 0:50 0:55 0:50
1:40 1:40
0:10
2:30
0:55 0:55
1:40 1:40
0:10 0:10
0:50
0:55
1:40 1:40
0:10 0:10
0:50 0:50
1:40
0:10 0:10
0:50 0:50
0:10
0:50 0:50
0:50
9 9
9
button: button:
button: button:
button: button:
Water Water Energy Energy
Wasser-
consumption consumption consumption
verbrauch button:
(litres/cycle) (kWh/cycle) (kWh/cycle)
(Liter/Progr.)
Water Water Energy Energy
button: button:
consumption consumption consumption
12.0 12.0 0.92 0.92
3:10 9,5
(litres/cycle) (kWh/cycle) (kWh/cycle)
Water Water Energy Energy
button: button:
15.0 15.0 1.35 1.35
consumption consumption consumption
12.0 12.0 0.92 0.92
7,0 - 14,0
(litres/cycle) (kWh/cycle) (kWh/cycle)
button: button:
Water Energy
15.0 15.0 1.50 1.50
consumption consumption
15.0 15.0 1.35 1.35
12.0 12.0 0.92 0.92
2:50 17,0
(litres/cycle) (kWh/cycle)
button:
Water Water Energy Energy
11.5 11.5 1.10 1.10
consumption consumption consumption
15.0 15.0 1.50 1.50
15.0 15.0 1.35 1.35
12.0 0.92
0:30 9,0
(litres/cycle) (kWh/cycle) (kWh/cycle)
Water Water Energy Energy
11.5 11.5 1.30 1.30
consumption consumption consumption
11.5 11.5 1.10 1.10
15.0 12.0 12.0 15.0 0.92 1.50 1.50 0.92
1:25 11,5
(litres/cycle) 15.0 (kWh/cycle) (kWh/cycle) 1.35
Water Water Energy Energy
4.5 4.5 0.01 0.01
consumption consumption consumption
11.5 11.5 1.30 1.30
12.0 12.0 0.92 0.92
11.5 11.5 1.10 1.10
1:40 15.0 15.0 1.35 12,0 1.35
(litres/cycle) (kWh/cycle) (kWh/cycle)
15.0 1.50
Water Energy
8.0 8.0 consumption 0.80 0.80
4.5 4.5 0.01 0.01
12.0 12.0 0.92 0.92
3:30 16,0
11.5 15.0 15.0 11.5 (kWh/cycle) 1.30 1.35 1.30 1.35
15.0 15.0 1.50 1.50
11.5 1.10
8.0 8.0 0.80 0.80
12.0 0.92
1:40 12,0
15.0 15.0 1.35 1.35
4.5 4.5 0.01 0.01
15.0 15.0 1.50 1.50
11.5 11.5 1.10 1.10
11.5 1.30
0:12 15.0 1.35 4,5
15.0 15.0 1.50 1.50
11.5 8.0 11.5 8.0 1.10 0.80 0.80 1.10
11.5 11.5 1.30 1.30
4.5 0.01
0:50 8,0
15.0 1.50
11.5 11.5 1.10 1.10
11.5 11.5 1.30 1.30
4.5 4.5 0.01 0.01
8.0 0.80
11.5 1.10
11.5 11.5 1.30 1.30
4.5 4.5 0.01 0.01
8.0 8.0 0.80 0.80
11.5 1.30
4.5 4.5 0.01 0.01
8.0 8.0 0.80 0.80
4.5 0.01
8.0 8.0 0.80 0.80
8.0 0.80
57
Energie-
verbrauch
(kWh/Progr.)
0,85
0,90 - 1,40
1,50
0,50
1,10
1,20
1,15
1,30
0,01
0,85