IKEA RAGLANDA Manual Del Usuario página 233

appears on the display; each time you press the button, appears on the display; each time you press the button,
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of the time (1h, 2h, etc. up to max. 12h) from the start of
of time between 1 and 12 hours. of time between 1 and 12 hours.
ENGLISH ENGLISH
will begin counting down. will begin counting down.
DELAY
the selected wash cycle will be increased. the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE
The start time of the program may be delayed for a period
appears on the display; each time you press the button, appears on the display; each time you press the button,
switches off and the wash cycle begins. switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
of time between 1 and 12 hours.
LATVISKI the time (1h, 2h, etc. up to max. 12h) from the start of the time (1h, 2h, etc. up to max. 12h) from the start of
ENGLISH ENGLISH
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
DELAY DELAY
will begin counting down. will begin counting down.
the selected wash cycle will be increased. the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE
appears on the display; each time you press the button,
repeatedly until the selected delayed start indicator light repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins. switches off and the wash cycle begins.
of time between 1 and 12 hours. of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
ENGLISH the time (1h, 2h, etc. up to max. 12h) from the start of
DELAY «h» switches off. DELAY «h» switches off.
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
will begin counting down. will begin counting down.
1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
3. Once this time has elapsed, the indicator light «h» appears on the display; each time you press the button, 3. Once this time has elapsed, the indicator light «h» appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
Programmu tabula
has been started. has been started.
of time between 1 and 12 hours. repeatedly until the selected delayed start indicator light of time between 1 and 12 hours. repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins. switches off and the wash cycle begins.
the time (1h, 2h, etc. up to max. 12h) from the start of the time (1h, 2h, etc. up to max. 12h) from the start of button and within 4 seconds close the door: the timer
DELAY DELAY
«h» switches off. «h» switches off.
To adjust the delay time and select a shorter period of time, 1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol To adjust the delay time and select a shorter period of time,
the selected wash cycle will be increased. the selected wash cycle will be increased.
will begin counting down.
The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
appears on the display; each time you press the button, appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE press the DELAY button. To cancel it, press the button 2. Select the wash program, press the START/PAUSE press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h»
of time between 1 and 12 hours. has been started. of time between 1 and 12 hours. has been started.
repeatedly until the selected delayed start indicator light button and within 4 seconds close the door: the timer the time (1h, 2h, etc. up to max. 12h) from the start of repeatedly until the selected delayed start indicator light the time (1h, 2h, etc. up to max. 12h) from the start of button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
DELAY
1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol
«h» switches off. the selected wash cycle will be increased. «h» switches off. the selected wash cycle will be increased.
will begin counting down. will begin counting down.
To adjust the delay time and select a shorter period of time,
The start time of the program may be delayed for a period
Programma
2. Select the wash program, press the START/PAUSE The DELAY function cannot be set once a wash cycle appears on the display; each time you press the button, The DELAY function cannot be set once a wash cycle 2. Select the wash program, press the START/PAUSE appears on the display; each time you press the button,
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
Program Program
of time between 1 and 12 hours.
has been started. the time (1h, 2h, etc. up to max. 12h) from the start of has been started. the time (1h, 2h, etc. up to max. 12h) from the start of
switches off and the wash cycle begins. button and within 4 seconds close the door: the timer switches off and the wash cycle begins. button and within 4 seconds close the door: the timer
repeatedly until the selected delayed start indicator light
1. Press the DELAY button: the corresponding «h» symbol the selected wash cycle will be increased. the selected wash cycle will be increased.
will begin counting down. will begin counting down.
To adjust the delay time and select a shorter period of time, «h» switches off. To adjust the delay time and select a shorter period of time,
appears on the display; each time you press the button,
3. Once this time has elapsed, the indicator light «h» 2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE 3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle
Program Program
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
repeatedly until the selected delayed start indicator light switches off and the wash cycle begins. has been started. repeatedly until the selected delayed start indicator light switches off and the wash cycle begins.
Eco Eco
1 Eko 1 1
the selected wash cycle will be increased. will begin counting down. will begin counting down.
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
«h» switches off. «h» switches off.
2. Select the wash program, press the START/PAUSE
The DELAY function cannot be set once a wash cycle press the DELAY button. To cancel it, press the button 3. Once this time has elapsed, the indicator light «h» press the DELAY button. To cancel it, press the button 3. Once this time has elapsed, the indicator light «h» The DELAY function cannot be set once a wash cycle
Conventional Conventional
button and within 4 seconds close the door: the timer
2 switches off and the wash cycle begins. 2 switches off and the wash cycle begins.
has been started. repeatedly until the selected delayed start indicator light repeatedly until the selected delayed start indicator light has been started.
Program Program
Eco Eco
1 1
2 Auto wash and dry wash and dry
To adjust the delay time and select a shorter period of time, will begin counting down. To adjust the delay time and select a shorter period of time,
«h» switches off. «h» switches off.
3. Once this time has elapsed, the indicator light «h»
The DELAY function cannot be set once a wash cycle press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle press the DELAY button. To cancel it, press the button
Conventional Conventional
Intensive Intensive
3 3
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light has been started. repeatedly until the selected delayed start indicator light has been started.
2 2 Program
3 Intensīvais
Eco wash and dry wash and dry Eco
1 1
To adjust the delay time and select a shorter period of time,
«h» switches off. «h» switches off.
režīms
press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
Fast Fast
4 4
has been started. repeatedly until the selected delayed start indicator light has been started.
Conventional Intensive Intensive Conventional
3 3
Program Program
2 2
Eco
«h» switches off. 1
4 Ātrais režīms 30'
wash and dry wash and dry
The DELAY function cannot be set once a wash cycle
Sanitizing Sanitizing
5 5
Fast Fast
4 has been started. 4
Conventional
Program Program
5 Ātrais režīms
Intensive Intensive
3 3
2
1 Eco 1 Eco
wash and dry
un žāvēšana
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Conventional Conventional Program Program
Fast Fast
4 4
Intensive
3
2 2
Eco Eco
1 1
6 Glāzes
wash and dry wash and dry
Self-Clean Self-Clean
7 7
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Conventional Conventional Program
Fast
4
Intensive Intensive
3 3
2 2
Eco Eco
1 1
7 Klusais režīms
wash and dry wash and dry
7 Self-Clean 7 Self-Clean
6 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. Pre-Wash 6 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. Pre-Wash
Conventional Conventional Sanitizing
5
Fast Fast
4 4
Intensive Intensive
3 3
2 Eco 2
1
8 Dezinficēšana
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
wash and dry wash and dry
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
Self-Clean Self-Clean
7 7
Pre-Wash
6
Conventional
Sanitizing Sanitizing
5 Pre-treatment of the dishes is not needed before any of the programs. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. 5 Pre-treatment of the dishes is not needed before any of the programs. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Fast Fast
4 4
Intensive Intensive
3 3
2
9 Priekšmazgāšana
wash and dry
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many address: dw_test_support@whirlpool.com **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many address: dw_test_support@whirlpool.com
Self-Clean
7
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Fast Fast
4 4
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs. Intensive Pre-treatment of the dishes is not needed before any of the programs.
3
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
10 Pašattīrīšanās
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many Self-Clean **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many Self-Clean
7 Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W address: dw_test_support@whirlpool.com 7 Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W address: dw_test_support@whirlpool.com
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Fast
4
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
EKO programmas dati ir mērīti laboratorijas apstākļos saskaņā ar Eiropas standartu EN 60436:2020.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following PROGRAMS DESCRIPTION
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
Piezīme par laboratorijas testu: Lai iegūtu informāciju par salīdzinošiem EN testēšanas nosacījumiem, lūdzu, nosūtiet e-pasta ziņojumu uz šādu
Self-Clean Self-Clean
7 7
Pre-Wash address: dw_test_support@whirlpool.com Pre-Wash
6 6
Sanitizing
5 Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
adresi: dw_test_support@whirlpool.com
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Trauku priekšmazgāšana nav nepieciešama nevienā programmā.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
PROGRAMS DESCRIPTION load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration. PROGRAMS DESCRIPTION
*) Ne visas iespējas var izmantot vienlaicīgi Self-Clean Self-Clean
7 7
address: dw_test_support@whirlpool.com Pre-Wash address: dw_test_support@whirlpool.com
6
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
**) Vērtības, kas norādītas programmām, kuras nav Eko programma, ir tikai orientējošas. Reālais laiks var mainīties, ņemot vērā tādus faktorus
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
kā pievadītā ūdens temperatūra un spiediens, istabas temperatūra, mazgāšanas līdzekļa daudzums, trauku daudzums un veids, trauku
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION Self-Clean PROGRAMS DESCRIPTION
7
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
izkārtojums, papildu izvēlnes un sensoru kalibrēšana. **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
1. EKO - Eko programma ir piemērota mēreni netīru trauku mazgāšanai; un tā ir vispiemērotākā programma kombinēta enerģijas un ūdens
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
patēriņa ziņā un tā tiek lietota, lai panāktu atbilstību ES Ekodizaina tiesību aktiem. address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
2. AUTO — vidēji netīriem traukiem ar piekaltušām ēdiena paliekām. Nosaka trauku netīrības līmeni un atbilstoši pielāgo programmu. Kad
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
sensors nosaka netīrības līmeni, displejā tiek parādīta animācija un atjaunināts cikla ilgums. load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
address: dw_test_support@whirlpool.com PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
3. INTENSĪVAIS REŽĪMS ― programma ieteicama ļoti netīriem traukiem, īpaši piemērota pannām un kastroļiem (nav ieteicams trausliem priekšmetiem).
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
4. ĀTRAIS REŽĪMS 30' — programma paredzēta mazliet netīriem traukiem bez piekaltušām ēdienu atliekām, ja ierīce ir nepilna. Neietver
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
žāvēšanas posmu.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
5. ĀTRAIS REŽĪMS UN ŽĀVĒŠANA — vidēji netīriem traukiem. Ikdienas cikls, kas nodrošina optimālu mazgāšanu un žāvēšanu īsākā laikā.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
6. GLĀZES — programma trauslu, pret augstu temperatūru jutīgu trauku, piemēram, glāžu un krūžu, mazgāšanai.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
7. KLUSAIS REŽĪMS ― paredzēts ierīces darbināšanai naktī. Nodrošina optimālu mazgāšanu un žāvēšanu ar mazāko iespējamo trokšņa līmeni.
8. DEZINFICĒŠANA ― vidēji vai ļoti netīriem traukiem ar papildu antibakteriālo mazgāšanu. Var izmantot trauku mazgājamās mašīnas apkopei.
PROGRAMS DESCRIPTION
9. PRIEKŠMAZGĀŠANA - tiek lietota trauku atsvaidzināšanai, kurus paredzēts mazgāt vēlāk. Šajā programmā nav paredzēts izmantot
mazgāšanas līdzekli.
10. PAŠATTĪRĪŠANĀS — programma, kas jāizmanto trauku mazgājamās mašīnas tehniskās apkopes veikšanai, ir jāizpilda tikai tad, kad trauku
mazgājamā mašīna ir TUKŠA, un šai darbībai ir jāizmanto īpaši, trauku mazgājamās mašīnas apkopei paredzēti tīrīšanas līdzekļi
Aktīvas programmas modificēšana
Ja atlasīta nepareizā programma un tā nesen sākusi darboties, to ir iespējams nomainīt: Atveriet ierīces durvis, turiet nospiestu IESLĒGŠANAS/
IZSLĒGŠANAS pogu, līdz ierīce izslēdzas. Ieslēdziet ierīci, nospiežot IESLĒGŠANAS/IZSLĒGŠANAS pogu, atlasiet jauno mazgāšanas ciklu un
vēlamās iespējas. Palaidiet mazgāšanas ciklu, nospiežot pogu Sākt/pauze un 4 sekunžu laikā aizverot durvis.
Ja paiet vairāk nekā 4 sekundes, ierīce automātiski pārtrauc darbību, un tā atkal ir jāieslēdz, atkārtojot pēdējo darbību.
Papildu trauku ievietošana
Neizslēdzot ierīci, atveriet durvis (sāk mirgot LED indtikators Sākt/pauze) (uzmanieties no KARSTA tvaika!) un ievietojiet traukus trauku
mazgājamā mašīnā. Nospiediet pogu Sākt/pauze un 4 sekunžu laikā aizveriet ierīces durvis, lai atsāktu programmas darbību no vietas, kur tā
tika pārtraukta.
Nejauša iejaukšanās
Ja mazgāšanas cikla laikā tiek atvērtas durvis vai notiek elektropadeves pārrāvums, cikls tiek apturēts. Nospiediet pogu Sākt/pauze un
4 sekunžu laikā aizveriet ierīces durvis, lai atsāktu programmas darbību no vietas, kur tā tika pārtraukta.
Pieejamās funkcijas (*)
Available
options
Available
50° 50°
50°
options
Available
55° 55°
50° 50°
50°-60°
options
65° 65° - -
55° 55°
50° 50°
65°
- -
50° 50° - -
Available
65° 65° - -
55° 55°
options
50°
50° -
65° 65° - -
Available
- -
50° 50° - -
65° 65° - -
55° options
50° 50°
50°
- -
- - - -
65° 65° - - Available
- -
50° 50° - -
65° -
55° 55° options
50° 50°
45°
- -
65° 65° - -
- -
- - - -
Available
65° 65° - -
-
50° -
65° 65° - -
55° 55°
options
50° 50°
50°
- -
65° 65° - -
- -
- - - -
65° -
- -
50° 50° - -
65° 65° - -
55° 55°
50°
65° -
- -
65° 65° - -
-
- -
65° 65° - -
- -
50° 50° - -
65° 65° - -
55°
- - -
-
65° -
- -
- - - -
65° 65° - -
- -
50° 50° - -
65° -
65° - -
- -
65° 65° - -
- -
- - - -
65° 65° - -
-
50° -
- -
65° 65° - -
- -
- - - -
65° -
- -
65° 65° - -
-
- -
-
65° -
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
NaturalDry NaturalDry
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec-
NaturalDry
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
button (6 sec). button (6 sec).
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing which automatically opens the door during/after drying phase to status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
NaturalDry NaturalDry
added together with the dishwasher. To see how to mount protec- E added together with the dishwasher. To see how to mount protec- E d d
– enabled ensure exceptional drying performance every day. Door opens at – enabled – disabled – disabled
button (6 sec). button (6 sec).
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
press and hold press and hold button (3 sec). button (3 sec).
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
NaturalDry NaturalDry
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
E E d d
– enabled – enabled – disabled – disabled
button (6 sec). button (6 sec).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture. tion foil please refer to (INSTALLATION GUIDE).
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
As additional steam protection, special designed protection foil is NaturalDry functionality could be disabled by the user as follows: As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
press and hold press and hold button (3 sec). button (3 sec).
NaturalDry NaturalDry
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec- 1. Go to the Dishwasher software menu pressing and holding Mazgāšanas
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
E E d d
– enabled – enabled Duration of – disabled Duration of – disabled
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE). button (6 sec).
Door opening system NaturalDry is a convection drying system the temperature that is safe to your kitchen furniture. Door opening system NaturalDry is a convection drying system the temperature that is safe to your kitchen furniture.
programmas
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
Available wash pro- wash pro-
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows: 2. You switched to NaturalDry Control Menu, you could change
As additional steam protection, special designed protection foil is which automatically opens the door during/after drying phase to As additional steam protection, special designed protection foil is which automatically opens the door during/after drying phase to
darbības laiks
consumption
NaturalDry
press and hold press and hold button (3 sec). button (3 sec).
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec- options ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec- gram gram
*) *)
(h:min)**)
(litres/cycle)
E d
– enabled – disabled
tion foil please refer to (INSTALLATION GUIDE). button (6 sec). tion foil please refer to (INSTALLATION GUIDE). button (6 sec).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system Duration of Duration of
(h:min) (h:min)
**) **)
To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows: 2. You switched to NaturalDry Control Menu, you could change NaturalDry functionality could be disabled by the user as follows: 2. You switched to NaturalDry Control Menu, you could change
which automatically opens the door during/after drying phase to As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
Available wash pro- wash pro-
consumption
press and hold button (3 sec).
1. Go to the Dishwasher software menu pressing and holding status of NaturalDry functionality by pressing 1. Go to the Dishwasher software menu pressing and holding status of NaturalDry functionality by pressing
ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec-
2:45 2:45
options gram gram
*) *)
E E d d
button (6 sec). – enabled button (6 sec). – enabled – disabled – disabled (litres/cycle)
the temperature that is safe to your kitchen furniture. tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
(h:min) (h:min)
Duration of Duration of **) **)
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows: As additional steam protection, special designed protection foil is NaturalDry functionality could be disabled by the user as follows:
Available wash pro- wash pro-
press and hold press and hold button (3 sec). button (3 sec).
1. Go to the Dishwasher software menu pressing and holding status of NaturalDry functionality by pressing 1. Go to the Dishwasher software menu pressing and holding status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec- 2:00 2:00
consumption
2:45 2:45
1:25–3:00
E E d d
options gram gram
button (6 sec). – enabled *) button (6 sec). – enabled *) – disabled – disabled
tion foil please refer to (INSTALLATION GUIDE).
(litres/cycle)
Duration of
2. You switched to NaturalDry Control Menu, you could change To confirm the change and exit from the Control Menu please 2. You switched to NaturalDry Control Menu, you could change To confirm the change and exit from the Control Menu please (h:min) (h:min)
NaturalDry functionality could be disabled by the user as follows:
**) **)
Available 2:30 wash pro- 2:30
press and hold status of NaturalDry functionality by pressing press and hold status of NaturalDry functionality by pressing button (3 sec). button (3 sec).
1. Go to the Dishwasher software menu pressing and holding
2:00 2:00
E E d d
– enabled – enabled – disabled – disabled
button (6 sec). options 2:45 gram 2:45
*)
Duration of Duration of
2. You switched to NaturalDry Control Menu, you could change To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
(h:min)
**)
0:55 0:55
Available wash pro- wash pro-
press and hold status of NaturalDry functionality by pressing press and hold button (3 sec). button (3 sec).
2:30 2:30
consumption
E d
2:00 2:00
– enabled – disabled
options gram gram
*) *)
2:45
(litres/cycle)
Duration of Duration of
To confirm the change and exit from the Control Menu please
(h:min) (h:min)
**) **)
1:40 1:40
Available wash pro- wash pro-
press and hold button (3 sec).
0:55 0:55
consumption
2:30 2:30
options gram gram 2:00
*) *) 2:45 2:45
(litres/cycle)
Duration of Duration of
(h:min) (h:min)
**) **)
0:10 0:10
Available wash pro- 1:40 wash pro- 1:40
consumption
0:55 0:55
2:30
options gram 2:00 gram 2:00
*) *) 2:45 2:45
(litres/cycle)
Duration of
(h:min) 0:50 (h:min) 0:50
**) **)
0:10 0:10
wash pro-
1:40 1:40
consumption
0:55
2:30 2:30
2:00 2:00
gram
*)
2:45 2:45
(litres/cycle)
(h:min)
**)
0:50 0:50
0:10 0:10
1:40
0:55 0:55
2:30 2:30
2:00 2:00
2:45
0:50 0:50
0:10
1:40 1:40
0:55 0:55
2:30 2:30
2:00
0:50
0:10 0:10
1:40 1:40
0:55 0:55
2:30
0:50 0:50
0:10 0:10
1:40 1:40
0:55
0:50 0:50
0:10 0:10
1:40
0:50 0:50
0:10
0:50
9
9
button: button:
9
button: button:
button: button:
Ūdens
Water Water Energy Energy
patēriņš
consumption consumption consumption
(litri/cikls) button:
(litres/cycle) (kWh/cycle) (kWh/cycle)
Water Water Energy Energy
consumption consumption consumption
button: button:
12.0 12.0 0.92 0.92
3:10 9,5
(litres/cycle) (kWh/cycle) (kWh/cycle)
Water Water Energy Energy
button: button:
15.0 15.0 1.35 1.35
consumption consumption consumption
12.0 12.0 0.92 0.92
7,0–14,0
(litres/cycle) (kWh/cycle) (kWh/cycle)
Water Energy
15.0 15.0 1.50 1.50
button: button:
15.0 consumption 15.0 1.35 consumption 1.35
12.0 12.0 0.92 0.92
2:50 17,0
(litres/cycle) (kWh/cycle)
Water Water Energy Energy
11.5 11.5 1.10 1.10
button:
15.0 15.0 1.50 1.50
consumption consumption consumption
15.0 15.0 1.35 1.35
12.0 0.92
0:30 9,0
(litres/cycle) (kWh/cycle) (kWh/cycle)
Water Water Energy Energy
11.5 11.5 1.30 1.30
11.5 11.5 1.10 1.10
consumption consumption consumption
15.0 15.0 1.50 1.50
15.0 1.35
12.0 12.0 0.92 0.92
1:25 11,5
(litres/cycle) (kWh/cycle) (kWh/cycle)
Water 4.5 Water 4.5 Energy 0.01 Energy 0.01
11.5 11.5 1.30 1.30
consumption consumption consumption
11.5 11.5 1.10 1.10
15.0 1.50
15.0 15.0 1.35 1.35
12.0 12.0 0.92 0.92
1:40 12,0
(litres/cycle) (kWh/cycle) (kWh/cycle)
8.0 8.0 0.80 0.80
Water Energy
4.5 4.5 0.01 0.01
11.5 11.5 1.30 1.30
consumption
11.5 1.10
15.0 15.0 1.50 1.50
15.0 15.0 1.35 1.35
12.0 12.0 0.92 0.92
3:30 16,0
(kWh/cycle)
8.0 8.0 0.80 0.80
4.5 4.5 0.01 0.01
11.5 1.30
11.5 11.5 1.10 1.10
15.0 15.0 1.50 1.50
15.0 15.0 1.35 1.35
12.0 0.92
1:40 12,0
8.0 8.0 0.80 0.80
4.5 0.01
11.5 11.5 1.30 1.30
11.5 11.5 1.10 1.10
15.0 15.0 1.50 1.50
15.0 1.35
0:12 4,5
8.0 0.80
4.5 4.5 0.01 0.01
11.5 11.5 1.30 1.30
11.5 11.5 1.10 1.10
15.0 1.50
0:50 8,0
8.0 8.0 0.80 0.80
4.5 4.5 0.01 0.01
11.5 11.5 1.30 1.30
11.5 1.10
8.0 8.0 0.80 0.80
4.5 4.5 0.01 0.01
11.5 1.30
8.0 8.0 0.80 0.80
4.5 0.01
8.0 0.80
9
233
9
Enerģijas
patēriņš
(kWh/cikls)
0,85
0,90–1,40
1,50
0,50
1,10
1,20
1,15
1,30
0,01
0,85