IKEA RAGLANDA Manual Del Usuario página 100

ENGLISH ENGLISH
will begin counting down. will begin counting down.
DELAY
the selected wash cycle will be increased. the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE
The start time of the program may be delayed for a period
appears on the display; each time you press the button, appears on the display; each time you press the button,
switches off and the wash cycle begins. switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of the time (1h, 2h, etc. up to max. 12h) from the start of
ENGLISH ENGLISH
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
DELAY DELAY
will begin counting down. will begin counting down.
the selected wash cycle will be increased. the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
EESTI
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE
appears on the display; each time you press the button,
repeatedly until the selected delayed start indicator light repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins. switches off and the wash cycle begins.
of time between 1 and 12 hours. of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
ENGLISH the time (1h, 2h, etc. up to max. 12h) from the start of
DELAY «h» switches off. DELAY «h» switches off.
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
1. Press the DELAY button: the corresponding «h» symbol will begin counting down. 1. Press the DELAY button: the corresponding «h» symbol will begin counting down.
the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
3. Once this time has elapsed, the indicator light «h» appears on the display; each time you press the button, 3. Once this time has elapsed, the indicator light «h» appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
has been started. has been started.
of time between 1 and 12 hours. repeatedly until the selected delayed start indicator light of time between 1 and 12 hours. repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins. switches off and the wash cycle begins.
the time (1h, 2h, etc. up to max. 12h) from the start of the time (1h, 2h, etc. up to max. 12h) from the start of button and within 4 seconds close the door: the timer
DELAY DELAY
«h» switches off. «h» switches off.
Programmide tabel
1. Press the DELAY button: the corresponding «h» symbol To adjust the delay time and select a shorter period of time, the selected wash cycle will be increased. To adjust the delay time and select a shorter period of time, 1. Press the DELAY button: the corresponding «h» symbol the selected wash cycle will be increased.
will begin counting down.
The start time of the program may be delayed for a period The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle The start time of the program may be delayed for a period
appears on the display; each time you press the button, appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button 2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
has been started. has been started.
of time between 1 and 12 hours. of time between 1 and 12 hours.
repeatedly until the selected delayed start indicator light the time (1h, 2h, etc. up to max. 12h) from the start of repeatedly until the selected delayed start indicator light the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer switches off and the wash cycle begins.
DELAY
1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol
«h» switches off. will begin counting down. the selected wash cycle will be increased. «h» switches off. the selected wash cycle will be increased. will begin counting down.
To adjust the delay time and select a shorter period of time,
The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE The DELAY function cannot be set once a wash cycle appears on the display; each time you press the button, 2. Select the wash program, press the START/PAUSE The DELAY function cannot be set once a wash cycle appears on the display; each time you press the button,
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
Program
of time between 1 and 12 hours. Programm
the time (1h, 2h, etc. up to max. 12h) from the start of the time (1h, 2h, etc. up to max. 12h) from the start of
has been started. button and within 4 seconds close the door: the timer has been started. button and within 4 seconds close the door: the timer
switches off and the wash cycle begins. repeatedly until the selected delayed start indicator light switches off and the wash cycle begins.
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased. the selected wash cycle will be increased.
To adjust the delay time and select a shorter period of time, will begin counting down. To adjust the delay time and select a shorter period of time, will begin counting down.
«h» switches off.
appears on the display; each time you press the button,
3. Once this time has elapsed, the indicator light «h» 2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE 3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle
Program
button and within 4 seconds close the door: the timer the time (1h, 2h, etc. up to max. 12h) from the start of button and within 4 seconds close the door: the timer
switches off and the wash cycle begins. switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light Eco has been started. repeatedly until the selected delayed start indicator light Eco
1 1
1 Öko
the selected wash cycle will be increased.
will begin counting down. will begin counting down.
«h» switches off. To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time, «h» switches off.
2. Select the wash program, press the START/PAUSE
press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle 3. Once this time has elapsed, the indicator light «h» The DELAY function cannot be set once a wash cycle 3. Once this time has elapsed, the indicator light «h» press the DELAY button. To cancel it, press the button
Conventional Conventional
button and within 4 seconds close the door: the timer switches off and the wash cycle begins. switches off and the wash cycle begins.
2 has been started. repeatedly until the selected delayed start indicator light 2 has been started. repeatedly until the selected delayed start indicator light
Program
Eco Eco
1 1
2 Auto wash and dry wash and dry
will begin counting down.
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
«h» switches off. «h» switches off.
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle press the DELAY button. To cancel it, press the button
Conventional Conventional
Intensive Intensive
3 3
repeatedly until the selected delayed start indicator light has been started. switches off and the wash cycle begins. repeatedly until the selected delayed start indicator light has been started.
2 2
wash and dry Eco Eco wash and dry
1 1
3 Intensiivne To adjust the delay time and select a shorter period of time,
«h» switches off. «h» switches off.
press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
Fast Fast
4 4
repeatedly until the selected delayed start indicator light has been started. has been started.
Intensive Intensive
3 Conventional 3 Conventional
Program
2 2
Eco
«h» switches off. 1
4 Kiirpesu 30'
wash and dry wash and dry
The DELAY function cannot be set once a wash cycle
Sanitizing Sanitizing
5 5
Fast Fast
4 4
has been started.
Conventional Program
5 Kiirpesu
Intensive Intensive
3 3
Eco 2 Eco
1 1
wash and dry
ja -kuivatus
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Conventional Conventional
Program
Fast Fast
4 4
Intensive
3
2 2
Eco Eco
6 Klaas 1 1
wash and dry wash and dry
Self-Clean Self-Clean
7 7
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 Conventional 5 Conventional
Program
Fast
4
Intensive Intensive
3 3
2 2
Eco Eco
1 1
7 Vaikne
wash and dry wash and dry
Self-Clean Self-Clean
7 7
Pre-Wash Pre-Wash
6 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. 6 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Conventional Conventional Sanitizing
5
Fast Fast
4 4
Intensive Intensive
3 3
2 2
Eco
1
8 Antibakteriaalne
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
wash and dry wash and dry
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
Self-Clean Self-Clean
7 7
Pre-Wash
6
Conventional Sanitizing Sanitizing
5 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. 5 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
Fast Fast
4 4
Intensive Intensive
3 3
2
9 Eelpesu
wash and dry
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean
7
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Fast Fast
4 factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of 4 factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs. Intensive Pre-treatment of the dishes is not needed before any of the programs.
3
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
10 Isepuhastus
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean Self-Clean
7 address: dw_test_support@whirlpool.com Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W 7 address: dw_test_support@whirlpool.com Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Fast
Ökoprogrammi andmed on mõõdetud laboratoorsetes tingimustes vastavalt Euroopa standardile EN 60436:2020. 4
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
Märkus katselaboritele. Teavet võrdlevate EN-katsetingimuste kohta küsige meiliaadressil:
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
Self-Clean Self-Clean
dw_test_support@whirlpool.com 7 7
Pre-Wash address: dw_test_support@whirlpool.com Pre-Wash
6 6
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Sanitizing Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
5 **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Nõude eeltöötlus ei ole ühegi programmi kasutamise eelselt vajalik.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Kõiki valikuid korraga kasutada ei saa
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration. PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION load, load balancing, additional selected options and sensor calibration.
Self-Clean Self-Clean
7 7
address: dw_test_support@whirlpool.com Pre-Wash address: dw_test_support@whirlpool.com
6
**) Muude programmide väärtused peale ökoprogrammi omade on ainult näitlikud. Tegelik aeg võib varieeruda olenevalt paljudest teguritest, **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
nagu näiteks sissevõetava vee temperatuur ja rõhk, toatemperatuur, pesuvahendi kogus, pestavate nõude hulk ja tüüp, nõude paigutus,
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
lisavalikud ja anduri kalibreering.
PROGRAMS DESCRIPTION Self-Clean PROGRAMS DESCRIPTION
7
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
1. ÖKO – ökoprogramm sobib keskmiselt määrdunud nõude pesemiseks. See on sellise kasutuse korral kombineeritud energia- ja Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
veesäästu seisukohalt kõige tõhusam programm, mida kasutatakse EL-i ökodisaini seadusandlusega vastavuse hindamiseks.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
2. AUTO – keskmiselt määrdunud nõud, millel on kuivanud toidujääke. Tuvastab nõude määrdumisastme ning reguleerib programmi
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
sellele vastavalt. Ajaks, mil andur tuvastab nõude määrdumisastet, ilmub ekraanile animatsioon ja tsükli kestust muudetakse.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
address: dw_test_support@whirlpool.com PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
3. INTENSIIVNE – tugevalt määrdunud nõude pesemiseks soovitatav programm. Eriti sobiv pannide ja pottide pesemiseks (ärge
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-treatment of the dishes is not needed before any of the programs.
kasutage õrnade nõude jaoks). factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
4. KIIRPESU 30' – programm poole masinatäie kergelt määrdunud kuivanud toidujääkideta nõude pesemiseks. Ei hõlma kuivatusfaasi.
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
5. KIIRPESU JA -KUIVATUS – tavapäraselt määrdunud nõud. Igapäevane tsükkel, mis tagab optimaalse puhastuse ja kuivatuse lühema
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
aja jooksul.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
6. KLAAS – programm õrnade nõude pesemiseks, mis on tundlikumad kõrgete temperatuuride suhtes, nt klaasid ja tassid.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
7. VAIKNE – Sobib seadme kasutamiseks öösel. Tagab optimaalse puhastuse ja kuivatuse võimalikult vaikse heliga.
PROGRAMS DESCRIPTION
8. ANTIBAKTERIAALNE – mõõdukalt või tugevalt määrdunud nõude pesuprogramm koos täiendava antibakteriaalse pesuga. Saab
kasutada nõudepesumasina hoolduseks.
9. EELPESU – kasutatakse nõude värskendamiseks, et neid hiljem pesta. Selle programmiga pesuvahendit ei kasutata.
10. ISEPUHASTUS – programm nõudepesumasina hooldamiseks, mida tohib kasutada ainult TÜHJA nõudepesumasina korral, kasutades
nõudepesumasina hoodamiseks mõeldud spetsiaalseid puhastusvahendeid.
Töötava programmi muutmine
Kui valisite vale programmi, saab seda kohe programmi alguses veel muuta: avage uks, vajutage ja hoidke SISSE-/VÄLJALÜLITUSE nuppu all
ning masin lülitub välja. Lülitage masin SISSE-/VÄLJALÜLITUSE nuppu vajutades taas sisse ja valige uus pesutsükkel ning võimalikud lisavalikud;
käivitage pesutsükkel, vajutades nuppu START/Paus ja sulgedes 4 sekundi jooksul ukse.
Kui sellele kulub rohkem kui 4 sekundit, peatub seade automaatselt ja te peate selle taaskäivitama, korrates viimast toimingut.
Nõude lisamine
Avage masinat välja lülitamata uks (START/Paus-LED hakkab vilkuma) (ettevaatust, KUUM aur!) ja pange masinasse nõusid juurde. Vajutage
nuppu START/Paus ja sulgege uks 4 sekundi jooksul, tsükkel jätkub kohast, kus see katkestati.
Ootamatud katkestused
Kui pesutsükli ajal masina uks avatakse või tekib voolukatkestus, siis tsükkel seiskub. Vajutage nuppu START/Paus ja sulgege uks 4 sekundi
jooksul, tsükkel jätkub kohast, kus see katkestati.
Program
Program
50° 50°
50°
55° 55°
Program
50° 50°
50°-60°
65° 65° -
55° 55°
Program
50° 50°
65°
- -
50° 50° -
65° 65° -
Program
55° 55°
50°
50° -
65° 65° -
- -
50° 50° -
Program
65° 65° -
55°
50° 50°
50°
- -
- - -
65° 65° -
- -
Program
50° 50° -
65°
55° 55°
50° 50°
45°
- -
65° 65° -
- -
- - -
65° 65° -
-
50°
65° 65° -
55° 55°
50° 50°
50°
- -
65° 65° -
- -
- - -
65°
- -
50° 50° -
65° 65° -
55° 55°
50°
65° -
- -
65° 65° -
-
-
65° 65° -
- -
50° 50° -
65° 65° -
55°
- - -
-
65°
- -
- - -
65° 65° -
- -
50° 50° -
65° -
65° - -
- -
65° 65° -
- -
- - -
65° 65° -
-
50° -
- -
65° 65° -
- -
- - -
65° -
- -
65° 65° -
-
- -
-
65° -
NaturalDry NaturalDry
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec-
NaturalDry
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
button (6 sec). button (6 sec).
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing which automatically opens the door during/after drying phase to status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
NaturalDry NaturalDry
added together with the dishwasher. To see how to mount protec- E added together with the dishwasher. To see how to mount protec- E d
– enabled – enabled – disabled
ensure exceptional drying performance every day. Door opens at
button (6 sec). button (6 sec).
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
press and hold press and hold button (3 sec).
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
NaturalDry NaturalDry
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
E E d
– enabled – enabled – disabled
button (6 sec). button (6 sec).
the temperature that is safe to your kitchen furniture. tion foil please refer to (INSTALLATION GUIDE). the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
As additional steam protection, special designed protection foil is NaturalDry functionality could be disabled by the user as follows: As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
press and hold press and hold button (3 sec).
NaturalDry NaturalDry
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec- ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec- ensure exceptional drying performance every day. Door opens at
E E d
– enabled – enabled Duration of – disabled Duration of
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE). the temperature that is safe to your kitchen furniture. tion foil please refer to (INSTALLATION GUIDE). the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
Available Available 2. You switched to NaturalDry Control Menu, you could change wash pro- wash pro-
Saadavalolevad NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to As additional steam protection, special designed protection foil is
NaturalDry press and hold press and hold button (3 sec).
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding status of NaturalDry functionality by pressing
options ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec- options ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec- gram
funktsioonid (*) *) *)
E
button (6 sec). button (6 sec). – enabled
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
Door opening system NaturalDry is a convection drying system the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
Duration of Duration of
(h:min)
To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows: 2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change NaturalDry functionality could be disabled by the user as follows:
which automatically opens the door during/after drying phase to As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
Available Available wash pro- wash pro-
press and hold
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec- 1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
2:45
options options gram
*) *)
E E d
– enabled – enabled – disabled
tion foil please refer to (INSTALLATION GUIDE). button (6 sec). tion foil please refer to (INSTALLATION GUIDE). button (6 sec).
the temperature that is safe to your kitchen furniture.
(h:min)
Duration of Duration of
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows: As additional steam protection, special designed protection foil is NaturalDry functionality could be disabled by the user as follows:
Available Available wash pro- wash pro-
press and hold status of NaturalDry functionality by pressing press and hold status of NaturalDry functionality by pressing button (3 sec).
1. Go to the Dishwasher software menu pressing and holding added together with the dishwasher. To see how to mount protec- 1. Go to the Dishwasher software menu pressing and holding
2:00
2:45
E E d
options options gram
– enabled – enabled – disabled
button (6 sec). *) button (6 sec). *)
tion foil please refer to (INSTALLATION GUIDE).
Duration of
To confirm the change and exit from the Control Menu please 2. You switched to NaturalDry Control Menu, you could change To confirm the change and exit from the Control Menu please 2. You switched to NaturalDry Control Menu, you could change (h:min)
NaturalDry functionality could be disabled by the user as follows:
Available wash pro-
- press and hold status of NaturalDry functionality by pressing press and hold status of NaturalDry functionality by pressing button (3 sec). 2:30
1. Go to the Dishwasher software menu pressing and holding
2:00
E E d
button (6 sec). options – enabled – enabled 2:45 – disabled
*)
Duration of Duration of
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
- 0:55
Available Available wash pro- wash pro-
press and hold press and hold button (3 sec).
status of NaturalDry functionality by pressing
- 2:30
E d 2:00
– enabled – disabled
options options gram
*) *)
Duration of Duration of
To confirm the change and exit from the Control Menu please
(h:min)
- 1:40
Available press and hold Available wash pro- button (3 sec). wash pro-
- 0:55
- 2:30
options options gram
*) *)
2:45
Duration of Duration of
(h:min)
- 0:10
- 1:40
Available Available wash pro- wash pro-
- 0:55
-
options options gram 2:00
*) *) 2:45
Duration of
- (h:min) 0:50
- 0:10
Available wash pro-
- 1:40
-
- 2:30
2:00
options gram
*)
2:45
(h:min)
- 0:50
- 0:10
-
- 0:55
- 2:30
2:00
2:45
- 0:50
-
- 1:40
- 0:55
- 2:30
2:00
-
- 0:10
- 1:40
- 0:55
2:30
- 0:50
- 0:10
- 1:40
0:55
- 0:50
- 0:10
1:40
- 0:50
0:10
0:50
button:
d
– disabled
button (3 sec).
button:
d
– disabled
button (3 sec).
button:
d
– disabled
Pesuprogrammi Water Water Veekulu Energy
consumption consumption consumption
kestus (liitrit/
button (3 sec).
gram
(litres/cycle) (litres/cycle) (kWh/cycle)
(h:min)**) tsükkel)
d
– disabled
(h:min)
**) **)
Water Water Energy
consumption consumption consumption
button (3 sec).
button:
2:45 12.0 12.0 0.92
3:10 9,5
gram
d
– disabled (litres/cycle) (litres/cycle) (kWh/cycle)
(h:min)
**) **)
Water Water Energy
button (3 sec). button:
2:00 15.0 15.0 1.35
consumption consumption consumption
2:45 12.0 12.0 0.92
1:25 - 3:00 7,0 - 14,0
d
gram
– disabled
(litres/cycle) (litres/cycle) (kWh/cycle)
(h:min)
**) **)
Water
button (3 sec). 2:30 15.0 15.0 button: 1.50
2:00 15.0 15.0 1.35
consumption
d
gram 2:45 – disabled 12.0 12.0 0.92
2:50 17,0
(litres/cycle)
(h:min)
**)
Water Water Energy
0:55 11.5 11.5 1.10
button (3 sec).
button:
2:30 15.0 15.0 1.50
consumption consumption consumption
2:00 15.0 15.0 1.35
gram
2:45 12.0
0:30 9,0
(litres/cycle) (litres/cycle) (kWh/cycle)
(h:min)
**) **)
Water Water Energy
1:40 11.5 11.5 1.30
0:55 11.5 11.5 1.10
consumption consumption consumption
2:30 15.0 15.0 1.50
gram 2:00 15.0
2:45 12.0 12.0 0.92
1:25 11,5
(litres/cycle) (litres/cycle) (kWh/cycle)
(h:min)
**) **)
0:10 Water 4.5 Water 4.5 Energy 0.01
1:40 11.5 11.5 1.30
consumption consumption consumption
0:55 11.5 11.5 1.10
2:30 15.0
gram 2:00 15.0 15.0 1.35
2:45 12.0 12.0 0.92
1:40 12,0
(litres/cycle) (litres/cycle) (kWh/cycle)
(h:min) 0:50 8.0 8.0 0.80
**) **)
Water Energy
0:10 4.5 4.5 0.01
1:40 11.5 11.5 1.30
consumption consumption
0:55 11.5
2:30 15.0 15.0 1.50
2:00 15.0 15.0 1.35
2:45 12.0 12.0 0.92
3:30 16,0
(litres/cycle) (kWh/cycle)
**)
0:50 8.0 8.0 0.80
0:10 4.5 4.5 0.01
1:40 11.5
0:55 11.5 11.5 1.10
2:30 15.0 15.0 1.50
2:00 15.0 15.0 1.35
12.0 0.92
1:40 12,0
0:50 8.0 8.0 0.80
0:10 4.5
1:40 11.5 11.5 1.30
0:55 11.5 11.5 1.10
2:30 15.0 15.0 1.50
15.0 1.35
0:12 4,5
0:50 8.0
0:10 4.5 4.5 0.01
1:40 11.5 11.5 1.30
0:55 11.5 11.5 1.10
15.0 1.50
0:50 8,0
0:50 8.0 8.0 0.80
0:10 4.5 4.5 0.01
1:40 11.5 11.5 1.30
11.5 1.10
0:50 8.0 8.0 0.80
0:10 4.5 4.5 0.01
11.5 1.30
0:50 8.0 8.0 0.80
4.5 0.01
8.0 0.80
9 9
9 9
100
button:
9
button:
button:
Energy
Energiakulu
consumption
button:
(kWh/tsükkel)
(kWh/cycle)
Energy
consumption
button:
0.92
0,85
(kWh/cycle)
Energy
button:
1.35
consumption
0.92
0,90 - 1,40
(kWh/cycle)
Energy
button: 1.50
1.35
consumption
0.92
1,50
(kWh/cycle)
Energy
1.10
1.50
consumption
1.35
0.92
0,50
(kWh/cycle)
Energy
1.30
1.10
consumption
1.50
1.35
0.92
1,10
(kWh/cycle)
Energy 0.01
1.30
consumption
1.10
1.50
1.35
0.92
1,20
(kWh/cycle)
0.80
0.01
1.30
1.10
1.50
1.35
0.92
1,15
0.80
0.01
1.30
1.10
1.50
1.35
1,30
0.80
0.01
1.30
1.10
1.50
0,01
0.80
0.01
1.30
1.10
0,85
0.80
0.01
1.30
0.80
0.01
0.80