IKEA RAGLANDA Manual Del Usuario página 130

ENGLISH ENGLISH
will begin counting down. will begin counting down.
DELAY
the selected wash cycle will be increased. the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE
The start time of the program may be delayed for a period
appears on the display; each time you press the button, appears on the display; each time you press the button,
switches off and the wash cycle begins. switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of the time (1h, 2h, etc. up to max. 12h) from the start of
ENGLISH ENGLISH
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
DELAY DELAY
will begin counting down. will begin counting down.
the selected wash cycle will be increased. the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
SUOMI 3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE
appears on the display; each time you press the button,
repeatedly until the selected delayed start indicator light repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins. switches off and the wash cycle begins.
of time between 1 and 12 hours. of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
ENGLISH the time (1h, 2h, etc. up to max. 12h) from the start of
«h» switches off. «h» switches off.
DELAY DELAY
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
1. Press the DELAY button: the corresponding «h» symbol will begin counting down. 1. Press the DELAY button: the corresponding «h» symbol will begin counting down.
the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
3. Once this time has elapsed, the indicator light «h» appears on the display; each time you press the button, 3. Once this time has elapsed, the indicator light «h» appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
has been started. has been started.
of time between 1 and 12 hours. repeatedly until the selected delayed start indicator light of time between 1 and 12 hours. repeatedly until the selected delayed start indicator light
the time (1h, 2h, etc. up to max. 12h) from the start of switches off and the wash cycle begins. the time (1h, 2h, etc. up to max. 12h) from the start of switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
DELAY DELAY
«h» switches off. «h» switches off.
Ohjelmataulukko
1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol
To adjust the delay time and select a shorter period of time, the selected wash cycle will be increased. To adjust the delay time and select a shorter period of time, the selected wash cycle will be increased.
will begin counting down.
The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
appears on the display; each time you press the button, appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button 2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
of time between 1 and 12 hours. has been started. of time between 1 and 12 hours. has been started.
the time (1h, 2h, etc. up to max. 12h) from the start of the time (1h, 2h, etc. up to max. 12h) from the start of
repeatedly until the selected delayed start indicator light button and within 4 seconds close the door: the timer repeatedly until the selected delayed start indicator light button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
DELAY
1. Press the DELAY button: the corresponding «h» symbol the selected wash cycle will be increased. 1. Press the DELAY button: the corresponding «h» symbol the selected wash cycle will be increased.
«h» switches off. will begin counting down. «h» switches off. will begin counting down.
To adjust the delay time and select a shorter period of time,
The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE The DELAY function cannot be set once a wash cycle appears on the display; each time you press the button, 2. Select the wash program, press the START/PAUSE The DELAY function cannot be set once a wash cycle appears on the display; each time you press the button,
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
Program Program
of time between 1 and 12 hours. Ohjelma
has been started. the time (1h, 2h, etc. up to max. 12h) from the start of button and within 4 seconds close the door: the timer has been started. button and within 4 seconds close the door: the timer the time (1h, 2h, etc. up to max. 12h) from the start of
switches off and the wash cycle begins. switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
1. Press the DELAY button: the corresponding «h» symbol
will begin counting down. the selected wash cycle will be increased. will begin counting down. the selected wash cycle will be increased.
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
«h» switches off.
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE 3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h» 2. Select the wash program, press the START/PAUSE
press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle press the DELAY button. To cancel it, press the button
Program Program
the time (1h, 2h, etc. up to max. 12h) from the start of
switches off and the wash cycle begins. button and within 4 seconds close the door: the timer switches off and the wash cycle begins. button and within 4 seconds close the door: the timer
repeatedly until the selected delayed start indicator light Eco has been started. repeatedly until the selected delayed start indicator light Eco
1 1
1 Säästö
the selected wash cycle will be increased.
To adjust the delay time and select a shorter period of time, will begin counting down. To adjust the delay time and select a shorter period of time, will begin counting down.
«h» switches off. «h» switches off.
2. Select the wash program, press the START/PAUSE
press the DELAY button. To cancel it, press the button 3. Once this time has elapsed, the indicator light «h» The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle press the DELAY button. To cancel it, press the button 3. Once this time has elapsed, the indicator light «h»
Conventional Conventional
button and within 4 seconds close the door: the timer
2 has been started. repeatedly until the selected delayed start indicator light switches off and the wash cycle begins. 2 repeatedly until the selected delayed start indicator light has been started. switches off and the wash cycle begins.
Program Program
Eco Eco
1 1
2 Auto wash and dry wash and dry
will begin counting down.
«h» switches off. To adjust the delay time and select a shorter period of time, «h» switches off. To adjust the delay time and select a shorter period of time,
3. Once this time has elapsed, the indicator light «h»
The DELAY function cannot be set once a wash cycle press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle
Conventional Conventional
Intensive Intensive
3 3
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light has been started. has been started. repeatedly until the selected delayed start indicator light
2 2 Program
wash and dry wash and dry
1 Eco 1 Eco
3 Tehopesu
To adjust the delay time and select a shorter period of time,
«h» switches off. «h» switches off.
The DELAY function cannot be set once a wash cycle press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle
Fast Fast
4 4
repeatedly until the selected delayed start indicator light has been started. has been started.
Intensive Intensive
3 Conventional 3 Conventional
Program Program
2 2
Eco
4 Pika 30' «h» switches off. 1
wash and dry wash and dry
The DELAY function cannot be set once a wash cycle
Sanitizing Sanitizing
5 5
Fast Fast
4 has been started. 4
Conventional Program Program
5 Pikapesu
Intensive Intensive
3 3
2
Eco Eco
1 1
wash and dry
ja kuivaus
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Conventional Conventional
Program Program
Fast Fast
4 4
3 Intensive
2 Eco 2 Eco
1 1
6 Lasi
wash and dry wash and dry
Self-Clean Self-Clean
7 7
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Conventional Conventional Program
Fast
4
Intensive Intensive
3 3
2 Eco 2 Eco
1 1
7 Hiljainen
wash and dry wash and dry
7 Self-Clean 7 Self-Clean
Pre-Wash Pre-Wash
6 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. 6 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Conventional Conventional Sanitizing
5
Fast Fast
4 4
Intensive Intensive
3 3
2 2
Eco
8 Sanitointi 1
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
wash and dry wash and dry
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
Self-Clean Self-Clean
7 7
Pre-Wash
6
Conventional Sanitizing Sanitizing
5 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. 5 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
Fast Fast
4 4
Intensive Intensive
3 3
2
9 Esipesu
wash and dry
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
address: dw_test_support@whirlpool.com **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many address: dw_test_support@whirlpool.com **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean
7
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Fast Fast
4 factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of 4 factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
3 Pre-treatment of the dishes is not needed before any of the programs. Intensive Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
10 Itsepuhdistus
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many Self-Clean **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many Self-Clean
7 Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W address: dw_test_support@whirlpool.com 7 Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W address: dw_test_support@whirlpool.com
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Fast
SÄÄSTÖ-ohjelman tiedot on mitattu eurooppalaisen EN 60436:2020-standardin mukaisissa laboratorio-olosuhteissa. 4
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
Ilmoitus testilaboratorioille: Tietoa vertaavista EN-testausolosuhteista on saatavana lähettämällä sähköpostiviesti seuraavaan osoitteeseen:
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following PROGRAMS DESCRIPTION
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
Self-Clean Self-Clean
dw_test_support@whirlpool.com 7 7
Pre-Wash address: dw_test_support@whirlpool.com Pre-Wash
6 6
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Sanitizing Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
5 **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Astioiden esikäsittelyä ei tarvita ennen mitään näistä ohjelmista.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Kaikkia lisävalintoja ei ole mahdollista käyttää samanaikaisesti.
*) Not all options can be used simultaneously.
PROGRAMS DESCRIPTION load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration. PROGRAMS DESCRIPTION
Self-Clean Self-Clean
7 7
address: dw_test_support@whirlpool.com Pre-Wash address: dw_test_support@whirlpool.com
6
**) Muille kuin säästöohjelmille annetut arvot ovat ainoastaan suuntaa-antavia. Todellinen aika saattaa vaihdella eri tekijöiden mukaisesti. **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Näitä ovat muun muassa veden lämpötila ja sen tulopaine, huoneen lämpötila, pesuaineen määrä, astioiden määrä ja niiden tyyppi, kuorman
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
tasapaino, valitut lisätoiminnot sekä anturin kalibrointi.
PROGRAMS DESCRIPTION Self-Clean PROGRAMS DESCRIPTION
7
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
1. SÄÄSTÖ - Säästöohjelma sopii normaalisti likaisten astioiden puhdistamiseen, sillä tämäntyyppistä käyttöä varten se on Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
tehokkain ohjelma sekä energian että veden kulutuksen kannalta; tätä ohjelmaa käytetään EU:n ekosuunnitteludirektiivin
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
va atimustenmukaisuuden toteamise
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
2. AUTO - Normaalisti likaiset astiat, joissa on kuivuneita ruokatahroja. Tunnistaa astioiden likaisuuden automaattisesti ja säätää
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION address: dw_test_support@whirlpool.com PROGRAMS DESCRIPTION
ohjelmaa sen mukaisesti. Kun anturi tunnistaa astioiden likaisuutta, näytössä näkyy liikkuva kuva ja kone päivittää ohjelman keston.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-treatment of the dishes is not needed before any of the programs.
3. TEHOPESU - Suositeltu ohjelma erittäin likaisille astioille, sopii erityisesti pannuille ja kattiloille (ei saa käyttää aroille astioille). factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
4. PIKA 30' - Ohjelma, jota käytetään puolitäydelle koneelliselle hieman likaisia astioita, joissa ei ole kuivaneita ruoanjäämiä. Ohjelmaan
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ei kuulu kuivausvaihetta.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
5. PIKAPESU JA KUIVAUS - Normaalisti likaiset astiat. Jokapäiväiseen pesuun, takaa parhaat mahdolliset pesu- ja kuivaustulokset
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
lyhyemmässä ajassa.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
6. LASI - Ohjelma astioille, jotka ovat herkempiä kuumille lämpötiloille, kuten laseille ja kupeille.
PROGRAMS DESCRIPTION
7. HILJAINEN - Soveltuu laitteen yöaikaiseen käyttöön. Takaa ihanteelliset pesu- ja kuivaustulokset mahdollisimman hiljaisesti.
8. SANITOINTI - Normaalilikaiset tai hyvin likaiset astiat, lisänä antibakteerinen toiminto. Voidaan käyttää astianpesukoneen
kunnossapidon suorittamiseen.
9. ESIPESU - Käytetään myöhemmin pestäväksi aioittujen astioiden kuivumisen estämiseen. Tämän ohjelman kanssa ei käytetä
pesuainetta.
10. ITSEPUHDISTUS - Ohjelma, jota tulee käyttää astianpesukoneen huollon suorittamiseen, ainoastaan astianpesukoneen ollessa
TYHJÄ, käyttäen astianpesukoneen huoltoon tarkoitettuja erityispesuaineita.
Käynnissä olevan ohjelman muokkaaminen
Jos on valittu väärä ohjelma, voidaan se vaihtaa siinä tapauksessa, että se on juuri alkanut: avaa luukku, paina VIRTA-painiketta ja pidä sitä
painettuna niin pitkään, että kone sammuu. Laita kone uudelleen päälle VIRTA -painikkeesta ja valitse uusi pesujakso sekä mahdollisesti halutut
lisätoiminnot; Käynnistä jakso painamalla KÄYNNISTYS-/TAUKO-painiketta ja sulkemalla luukku 4 sekunnin sisällä.
Jos aikaa kuluu kauemmin kuin 4 sekuntia, laite menee automaattisesti taukotilaan ja se on käynnistettävä uudelleen toistamalla viimeinen
toimenpide.
Astioiden lisääminen
Avaa luukku konetta sammuttamatta (KÄYNNISTYS/TAUKO-led alkaa vilkkua) (varo KUUMAA höyryä!) ja laita astiat astianpesukoneeseen. Paina
KÄYNNISTYS-/TAUKO-painiketta ja sulje luukku 4 sekunnin sisällä; jakso jatkuu siitä, mihin se keskeytettiin.
Vahingossa tapahtuvat keskeytykset
Jos luukku avataan pesujakson aika, tai sähkö katkeaa, jakso keskeytyy. Paina KÄYNNISTYS-/TAUKO-painiketta ja sulje luukku 4 sekunnin sisällä;
jakso jatkuu siitä, mihin se keskeytettiin.
Available
Käytettävissä olevat
options
Available
50° 50°
50°
options
Available
55° 55°
50°-60° 50° 50°
options
65° 65° - -
55° 55°
50° 50°
65°
- -
50° 50° - -
Available
65° 65° - -
55° 55°
options
50°
50° –
65° 65° - -
Available
- -
50° 50° - -
65° 65° - -
55°
options
50° 50°
50°
- -
- - - -
65° 65° - - Available
- -
50° 50° - -
65° -
55° 55° options
50° 50°
45°
- -
65° 65° - -
- -
- - - -
Available
65° 65° - -
-
50° -
65° 65° - -
55° 55° options
50° 50°
50°
- -
65° 65° - -
- -
- - - -
65° -
- -
50° 50° - -
65° 65° - -
55° 55°
50°
65° –
- -
65° 65° - -
-
- -
65° 65° - -
- -
50° 50° - -
65° 65° - -
55°
– – –
-
65° -
- -
- - - -
65° 65° - -
- -
50° 50° - -
65° -
65° – –
- -
65° 65° - -
- -
- - - -
65° 65° - -
-
50° -
- -
65° 65° - -
- -
- - - -
65° -
65° 65° - - - -
- - -
-
65° -
en.
NaturalDry NaturalDry
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec-
NaturalDry
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
button (6 sec). button (6 sec).
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing which automatically opens the door during/after drying phase to status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
NaturalDry NaturalDry
E E d d
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec-
– enabled – enabled – disabled – disabled
ensure exceptional drying performance every day. Door opens at
button (6 sec). button (6 sec).
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
Door opening system NaturalDry is a convection drying system the temperature that is safe to your kitchen furniture. Door opening system NaturalDry is a convection drying system
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
press and hold press and hold button (3 sec). button (3 sec).
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
NaturalDry NaturalDry
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec- ensure exceptional drying performance every day. Door opens at
E E d d
– enabled – enabled – disabled – disabled
button (6 sec). button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
Door opening system NaturalDry is a convection drying system the temperature that is safe to your kitchen furniture. Door opening system NaturalDry is a convection drying system the temperature that is safe to your kitchen furniture.
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is NaturalDry functionality could be disabled by the user as follows:
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
press and hold press and hold button (3 sec). button (3 sec).
NaturalDry NaturalDry
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec- ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec-
E E d d
Duration of Duration of
– enabled – enabled – disabled – disabled
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE). the temperature that is safe to your kitchen furniture. tion foil please refer to (INSTALLATION GUIDE). the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
Pesuohjelman
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
Available wash pro- wash pro-
NaturalDry functionality could be disabled by the user as follows: 2. You switched to NaturalDry Control Menu, you could change NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to As additional steam protection, special designed protection foil is
consumption
NaturalDry
press and hold press and hold button (3 sec). button (3 sec).
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec- 1. Go to the Dishwasher software menu pressing and holding
ensure exceptional drying performance every day. Door opens at options ensure exceptional drying performance every day. Door opens at gram gram
toiminnot (*) *) *)
(h:min)**)
E d
button (6 sec). button (6 sec). – enabled – disabled
tion foil please refer to (INSTALLATION GUIDE). the temperature that is safe to your kitchen furniture. tion foil please refer to (INSTALLATION GUIDE). the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
Duration of (h:min) Duration of (h:min)
**)
To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows: 2. You switched to NaturalDry Control Menu, you could change NaturalDry functionality could be disabled by the user as follows: 2. You switched to NaturalDry Control Menu, you could change
As additional steam protection, special designed protection foil is which automatically opens the door during/after drying phase to As additional steam protection, special designed protection foil is
Available wash pro- wash pro-
consumption
status of NaturalDry functionality by pressing press and hold status of NaturalDry functionality by pressing button (3 sec).
1. Go to the Dishwasher software menu pressing and holding added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec- 1. Go to the Dishwasher software menu pressing and holding
ensure exceptional drying performance every day. Door opens at
2:45 2:45
options gram gram
*) *)
E E d d
button (6 sec). – enabled button (6 sec). – enabled – disabled – disabled
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
(h:min) (h:min)
Duration of Duration of **)
To confirm the change and exit from the Control Menu please 2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows: As additional steam protection, special designed protection foil is NaturalDry functionality could be disabled by the user as follows:
Available wash pro- wash pro-
press and hold press and hold button (3 sec). button (3 sec).
1. Go to the Dishwasher software menu pressing and holding status of NaturalDry functionality by pressing 1. Go to the Dishwasher software menu pressing and holding status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec- 2:00 2:00
consumption
2:45 2:45
1:25 - 3:00
E E d d
options gram gram
– enabled *) – enabled *) – disabled – disabled
tion foil please refer to (INSTALLATION GUIDE). button (6 sec). button (6 sec).
Duration of
To confirm the change and exit from the Control Menu please 2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change To confirm the change and exit from the Control Menu please (h:min) (h:min)
NaturalDry functionality could be disabled by the user as follows:
**)
press and hold Available press and hold button (3 sec). 2:30 wash pro- button (3 sec). 2:30
1. Go to the Dishwasher software menu pressing and holding status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
2:00 2:00
E E d d
– enabled – enabled – disabled – disabled
button (6 sec). options 2:45 gram 2:45
*)
Duration of Duration of
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
(h:min)
0:55 0:55
Available wash pro- wash pro-
press and hold status of NaturalDry functionality by pressing press and hold button (3 sec). button (3 sec).
2:30 2:30
consumption
E d 2:00 2:00
options – enabled gram – disabled gram
*) *) 2:45
Duration of Duration of
To confirm the change and exit from the Control Menu please
(h:min) (h:min)
**)
1:40 1:40
Available wash pro- wash pro-
press and hold button (3 sec).
0:55 0:55
consumption
2:30 2:30
2:00
options gram gram
*) *)
2:45 2:45
Duration of Duration of
(h:min) (h:min)
**)
0:10 0:10
Available wash pro- 1:40 wash pro- 1:40
consumption
0:55 0:55
2:30
options gram 2:00 gram 2:00
*) *)
2:45 2:45
Duration of
(h:min) 0:50 (h:min) 0:50
**)
0:10 0:10
wash pro-
1:40 1:40
consumption
0:55
2:30 2:30
gram 2:00 2:00
*)
2:45 2:45
(h:min)
**)
0:50 0:50
0:10 0:10
1:40
0:55 0:55
2:30 2:30
2:00 2:00
2:45
0:50 0:50
0:10
1:40 1:40
0:55 0:55
2:30 2:30
2:00
0:50
0:10 0:10
1:40 1:40
0:55 0:55
2:30
0:50 0:50
0:10 0:10
1:40 1:40
0:55
0:50 0:50
0:10 0:10
1:40
0:50 0:50
0:10
0:50
9
9
button: button:
9
button: button:
button: button:
Water Water Veden Energy Energy
consumption consumption consumption
kesto kulutus
button:
(litres/cycle) (litres/cycle) (kWh/cycle) (kWh/cycle)
(litraa/jakso)
**)
Water Water Energy Energy
consumption consumption consumption
button: button:
12.0 12.0 0.92 0.92
3:10 9,5
(litres/cycle) (litres/cycle) (kWh/cycle) (kWh/cycle)
**)
Water Water Energy Energy
button: button:
15.0 15.0 1.35 1.35
consumption consumption consumption
12.0 12.0 0.92 0.92
7,0 - 14,0
(litres/cycle) (litres/cycle) (kWh/cycle) (kWh/cycle)
**)
Water Energy
15.0 15.0 1.50 1.50
button: button:
15.0 15.0 1.35 1.35
consumption consumption
12.0 12.0 0.92 0.92
2:50 17,0
(litres/cycle) (kWh/cycle)
**)
Water Water Energy Energy
11.5 11.5 1.10 1.10
button:
15.0 15.0 1.50 1.50
consumption consumption consumption
15.0 15.0 1.35 1.35
12.0 0.92
0:30 9,0
(litres/cycle) (litres/cycle) (kWh/cycle) (kWh/cycle)
**)
Water Water Energy Energy
11.5 11.5 1.30 1.30
11.5 11.5 1.10 1.10
consumption consumption consumption
15.0 15.0 1.50 1.50
15.0 1.35
12.0 12.0 0.92 0.92
1:25 11,5
(litres/cycle) (litres/cycle) (kWh/cycle) (kWh/cycle)
**)
Water 4.5 Water 4.5 Energy 0.01 Energy 0.01
11.5 11.5 1.30 1.30
consumption consumption consumption
11.5 11.5 1.10 1.10
15.0 1.50
15.0 15.0 1.35 1.35
12.0 12.0 0.92 0.92
1:40 12,0
(litres/cycle) (litres/cycle) (kWh/cycle) (kWh/cycle)
8.0 8.0 0.80 0.80
**)
Water Energy
4.5 4.5 0.01 0.01
11.5 11.5 1.30 1.30
consumption
11.5 1.10
15.0 15.0 1.50 1.50
15.0 15.0 1.35 1.35
12.0 12.0 0.92 0.92
3:30 16,0
(litres/cycle) (kWh/cycle)
8.0 8.0 0.80 0.80
4.5 4.5 0.01 0.01
11.5 1.30
11.5 11.5 1.10 1.10
15.0 15.0 1.50 1.50
15.0 15.0 1.35 1.35
12.0 0.92
1:40 12,0
8.0 8.0 0.80 0.80
4.5 0.01
11.5 11.5 1.30 1.30
11.5 11.5 1.10 1.10
15.0 15.0 1.50 1.50
15.0 1.35
0:12 4,5
8.0 0.80
4.5 4.5 0.01 0.01
11.5 11.5 1.30 1.30
11.5 11.5 1.10 1.10
15.0 1.50
0:50 8,0
8.0 8.0 0.80 0.80
4.5 4.5 0.01 0.01
11.5 11.5 1.30 1.30
11.5 1.10
8.0 8.0 0.80 0.80
4.5 4.5 0.01 0.01
11.5 1.30
8.0 8.0 0.80 0.80
4.5 0.01
8.0 0.80
9
9
130
Energian
kulutus
(kWh/jakso)
0,85
0,90 - 1,40
1,50
0,50
1,10
1,20
1,15
1,30
0,01
0,85