IKEA RAGLANDA Manual Del Usuario página 160

button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of
of time between 1 and 12 hours. of time between 1 and 12 hours.
ENGLISH ENGLISH
will begin counting down.
DELAY
the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of
ENGLISH ENGLISH
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
DELAY DELAY
HRVATSKI will begin counting down.
the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE
repeatedly until the selected delayed start indicator light repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
of time between 1 and 12 hours. of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer
ENGLISH
DELAY «h» switches off. DELAY «h» switches off.
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
1. Press the DELAY button: the corresponding «h» symbol will begin counting down. 1. Press the DELAY button: the corresponding «h» symbol
The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
3. Once this time has elapsed, the indicator light «h» appears on the display; each time you press the button, 3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE
has been started. has been started.
of time between 1 and 12 hours. repeatedly until the selected delayed start indicator light of time between 1 and 12 hours. repeatedly until the selected delayed start indicator light
Tablica programa
switches off and the wash cycle begins.
the time (1h, 2h, etc. up to max. 12h) from the start of
DELAY DELAY
«h» switches off. «h» switches off.
1. Press the DELAY button: the corresponding «h» symbol To adjust the delay time and select a shorter period of time, the selected wash cycle will be increased. 1. Press the DELAY button: the corresponding «h» symbol To adjust the delay time and select a shorter period of time,
The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
appears on the display; each time you press the button,
press the DELAY button. To cancel it, press the button 2. Select the wash program, press the START/PAUSE press the DELAY button. To cancel it, press the button 2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
has been started. has been started.
of time between 1 and 12 hours. of time between 1 and 12 hours.
repeatedly until the selected delayed start indicator light the time (1h, 2h, etc. up to max. 12h) from the start of repeatedly until the selected delayed start indicator light
button and within 4 seconds close the door: the timer
DELAY
1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol
«h» switches off. the selected wash cycle will be increased. will begin counting down. «h» switches off.
To adjust the delay time and select a shorter period of time,
The start time of the program may be delayed for a period
The DELAY function cannot be set once a wash cycle 2. Select the wash program, press the START/PAUSE appears on the display; each time you press the button, The DELAY function cannot be set once a wash cycle 2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h» Program 3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of
has been started. button and within 4 seconds close the door: the timer has been started.
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased.
To adjust the delay time and select a shorter period of time, will begin counting down. To adjust the delay time and select a shorter period of time,
«h» switches off.
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE 3. Once this time has elapsed, the indicator light «h» 2. Select the wash program, press the START/PAUSE 3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle press the DELAY button. To cancel it, press the button
the time (1h, 2h, etc. up to max. 12h) from the start of button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light Eco repeatedly until the selected delayed start indicator light has been started. Eco
1 1
1 Eko
the selected wash cycle will be increased.
will begin counting down.
To adjust the delay time and select a shorter period of time, «h» switches off. «h» switches off. To adjust the delay time and select a shorter period of time,
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h» The DELAY function cannot be set once a wash cycle press the DELAY button. To cancel it, press the button 3. Once this time has elapsed, the indicator light «h» press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle
Conventional Conventional
button and within 4 seconds close the door: the timer switches off and the wash cycle begins.
2 repeatedly until the selected delayed start indicator light has been started. 2 repeatedly until the selected delayed start indicator light has been started.
Eco Eco
1 1
2 Auto wash and dry wash and dry
will begin counting down.
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
«h» switches off. «h» switches off.
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle press the DELAY button. To cancel it, press the button
Conventional Conventional
Intensive Intensive
3 3
has been started. repeatedly until the selected delayed start indicator light switches off and the wash cycle begins. repeatedly until the selected delayed start indicator light has been started.
2 2
Eco wash and dry wash and dry Eco
1 1
3 Intenzivno To adjust the delay time and select a shorter period of time,
«h» switches off. «h» switches off.
press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
Fast Fast
4 4
has been started. repeatedly until the selected delayed start indicator light has been started.
Intensive Intensive
3 Conventional 3 Conventional
2 2
Eco
«h» switches off. 1
4 Brzo pranje 30'
wash and dry wash and dry
The DELAY function cannot be set once a wash cycle
Sanitizing Sanitizing
5 5
Fast Fast
4 4
has been started.
Conventional
Intensive Intensive
3 3
Eco 2 Eco
1 1
5 Brzo pranje i sušenje
wash and dry
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Conventional Conventional
Fast Fast
4 4
Intensive
3
2 2
Eco Eco
1 1
6 Staklo
wash and dry wash and dry
Self-Clean Self-Clean
7 7
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Conventional Conventional
Fast
4
Intensive Intensive
3 3
2 2
Eco Eco
1 1
7 Tiho
wash and dry wash and dry
Self-Clean Self-Clean
7 7
Pre-Wash Pre-Wash
6 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. 6 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Conventional Conventional Sanitizing
5
Fast Fast
4 4
Intensive Intensive
3 3
2 2
Eco
1
8 Dezinfekcija
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
wash and dry wash and dry
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
Self-Clean Self-Clean
7 7
Pre-Wash
6
Sanitizing Conventional Sanitizing
5 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. 5 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
Fast Fast
4 4
Intensive Intensive
3 3
2
9 Pretpranje
wash and dry
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean
7
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Fast Fast
4 factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of 4 factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs. Intensive Pre-treatment of the dishes is not needed before any of the programs.
3
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
10 Samočišćenje
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean Self-Clean
7 Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W address: dw_test_support@whirlpool.com 7 Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W address: dw_test_support@whirlpool.com
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Fast
Podaci EKO programa izmjereni su u laboratorijskim uvjetima u skladu s europskom normom EN 60436:2020. 4
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
Napomena za laboratorijska ispitivanja: informacije o usporednim uvjetima ispitivanja EN možete dobiti tako da e-poruku pošaljete na adresu:
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
Self-Clean Self-Clean
dw_test_support@whirlpool.com 7 7
Pre-Wash address: dw_test_support@whirlpool.com Pre-Wash
6 6
Sanitizing
5 Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Prije primjene bilo kojeg programa nije potrebno obraditi posuđe.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Sve opcije ne mogu se istovremeno upotrebljavati
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration. PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION load, load balancing, additional selected options and sensor calibration.
Self-Clean Self-Clean
7 7
address: dw_test_support@whirlpool.com Pre-Wash address: dw_test_support@whirlpool.com
6
**) Vrijednosti koje su navedene za programe koji nisu eko služe samo kao informacija. Stvarno vrijeme može se razlikovati ovisno o brojnim **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
čimbenicima kao što su temperatura i tlak ulazne vode, sobna temperatura, količina deterdženta, količina i vrsta punjenja, ravnoteža punjenja,
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
dodatne odabrane opcije i baždarenje senzora.
PROGRAMS DESCRIPTION Self-Clean PROGRAMS DESCRIPTION
7
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
1. EKO – Program Eko prikladan je za uobičajeno zaprljano posuđe te je za takav način primjene to i najučinkovitiji program po pitanju
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
kombinirane potrošnje struje i vode, a upotrebljava se i za procjenu usklađenosti s propisima EU o ekodizajnu.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
2. AUTO – Za uobičajeno prljavo posuđe s ostacima sasušene hrane. Osjeća razinu zaprljanosti posuđa i prema tome podešava
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
program. Kad senzor otkrije razinu zaprljanosti prikazuje se animacija na zaslonu i ažurira se trajanje ciklusa.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
address: dw_test_support@whirlpool.com PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
3. INTENZIVNO – Preporučeni program za jako prljavo posuđe, posebno pogodan za tave i tave za umake (ne upotrebljavati za osjetljivo
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-treatment of the dishes is not needed before any of the programs.
posuđe). factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
4. BRZO PRANJE 30' – Program koji se koristi za pola punjenja malo zaprljanog posuđa s bez sasušenih ostataka hrane. Ne uključuje
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
fazu sušenja.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
5. BRZO PRANJE I SUŠENJE – Normalno zaprljano posuđe. Svakodnevni ciklus koji omogućuje optimalne rezultate čišćenja i sušenja za
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
manje vremena.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
6. STAKLO – Program za osjetljivo posuđe koje je osjetljivije na visoke temperature, primjerice čaše i šalice.
PROGRAMS DESCRIPTION
7. TIHO – Prikladno za noćni rad uređaja. Osigurava optimalnu učinkovitost čišćenja i sušenja uz najnižu emisiju buke.
8. DEZINFEKCIJA – Uobičajeno ili jače zaprljano posuđe s dodatnim antibakterijskim pranjem. Može se upotrebljavati za održavanje
perilice suđa.
9. PRETPRANJE – Upotrebljava se za osvježavanje posuđa koje će se prati kasnije. S ovim programom ne upotrebljava se deterdžent.
10. SAMOČIŠĆENJE – Program koji se upotrebljava za održavanje perilice posuđa treba izvršiti samo ako je perilica posuđa PRAZNA, a
pritom treba rabiti posebne deterdžente za održavanje perilice posuđa.
Izmjena programa rada
Ako odaberete pogrešan program, možete ga promijeniti pod uvjetom da je tek započeo: otvorite vrata, pritisnite i držite gumb za uključivanje/
isključivanje, stroj će se isključiti. Ponovno uključite stroj pomoću gumba za uključivanje/isključivanje i odaberite novi ciklus pranja i sve željene
opcije; Ciklus pokrenite pritiskom na gumb START/PAUZA i zatvaranjem vrata u roku od 4 s.
Ako to traje dulje o 4 sekunde, uređaj automatski prestaje raditi i morate ga ponovno pokrenuti ponavljajući posljednji postupak.
Dodavanje dodatnog suđa
Ne isključujući stroj otvorite vrata (LED svjetla START/Pauza)počinju treperiti (pazite na VRUĆU paru!) i stavite suđe u perilicu suđa. Pritisnite
gumb START/Pauza i zatvorite vrata u roku od 4 s, ciklus će se nastaviti od mjesta na kojem je prekinut.
Slučajni prekidi
Ako se tijekom ciklusa pranja vrata otvore ili ako je došlo do nestanka struje, ciklus se privremeno prekida. Pritisnite gumb START/Pauza i
zatvorite vrata u roku od 4 s, ciklus će se nastaviti od mjesta na kojem je prekinut.
button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of
will begin counting down.
the selected wash cycle will be increased.
appears on the display; each time you press the button,
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of
will begin counting down.
the selected wash cycle will be increased.
appears on the display; each time you press the button,
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of
will begin counting down.
the selected wash cycle will be increased.
appears on the display; each time you press the button,
switches off and the wash cycle begins.
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
the selected wash cycle will be increased.
will begin counting down.
appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
the selected wash cycle will be increased. will begin counting down.
appears on the display; each time you press the button,
Program Program
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
the selected wash cycle will be increased.
will begin counting down.
Program Program
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
50° 50°
50°
will begin counting down.
switches off and the wash cycle begins. 55° 55°
Program Program
50° 50°
50°– 60°
65° 65°
55° 55°
Program
50° 50°
65°
-
50° 50°
65° 65°
Program Program
55° 55°
50°
50° —
65° 65°
-
50° 50°
Program Program
65° 65°
55°
50° 50°
50°
-
- -
65° 65°
-
Program Program
50° 50°
65°
55° 55°
50° 50°
45°
65° 65° -
-
- -
65° 65°
Program
50°
65° 65°
55° 55°
50° 50°
50°
-
65° 65°
-
- -
65°
-
50° 50°
65° 65°
55° 55°
50°
65°
-
65° 65°
-
65° 65°
-
50° 50°
65° 65°
55°
— —
65°
-
- -
65° 65°
-
50° 50°
65°
65° —
-
65° 65°
-
- -
65° 65°
-
50°
-
65° 65°
-
- -
65°
-
65° 65°
-
-
-
65°
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
NaturalDry NaturalDry
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec-
NaturalDry
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
button (6 sec). button (6 sec).
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing which automatically opens the door during/after drying phase to status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
NaturalDry NaturalDry
added together with the dishwasher. To see how to mount protec- E added together with the dishwasher. To see how to mount protec- E
– enabled – enabled
ensure exceptional drying performance every day. Door opens at
button (6 sec). button (6 sec).
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
press and hold press and hold
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
NaturalDry NaturalDry
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
E E
– enabled – enabled
button (6 sec). button (6 sec).
the temperature that is safe to your kitchen furniture. tion foil please refer to (INSTALLATION GUIDE). the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is NaturalDry functionality could be disabled by the user as follows:
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
press and hold press and hold
NaturalDry NaturalDry
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec- ensure exceptional drying performance every day. Door opens at
E E
– enabled – enabled Duration of
button (6 sec).
the temperature that is safe to your kitchen furniture. tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE). the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
Dostupne
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
Available Available wash pro-
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows: 2. You switched to NaturalDry Control Menu, you could change
which automatically opens the door during/after drying phase to As additional steam protection, special designed protection foil is which automatically opens the door during/after drying phase to As additional steam protection, special designed protection foil is
funkcije (*)
NaturalDry press and hold press and hold
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec- ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec-
options options
*) *)
E
– enabled
tion foil please refer to (INSTALLATION GUIDE). button (6 sec). tion foil please refer to (INSTALLATION GUIDE). button (6 sec).
Door opening system NaturalDry is a convection drying system the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
Duration of
To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows: 2. You switched to NaturalDry Control Menu, you could change NaturalDry functionality could be disabled by the user as follows: 2. You switched to NaturalDry Control Menu, you could change
which automatically opens the door during/after drying phase to As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
Available Available wash pro-
press and hold
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec- 1. Go to the Dishwasher software menu pressing and holding
ensure exceptional drying performance every day. Door opens at
options options
*) *)
E E
– enabled – enabled
tion foil please refer to (INSTALLATION GUIDE). button (6 sec). tion foil please refer to (INSTALLATION GUIDE). button (6 sec).
the temperature that is safe to your kitchen furniture.
Duration of
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows: As additional steam protection, special designed protection foil is NaturalDry functionality could be disabled by the user as follows:
Available Available wash pro-
press and hold status of NaturalDry functionality by pressing press and hold status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding added together with the dishwasher. To see how to mount protec- 1. Go to the Dishwasher software menu pressing and holding
E E
options options
button (6 sec). – enabled *) button (6 sec). – enabled *)
tion foil please refer to (INSTALLATION GUIDE).
To confirm the change and exit from the Control Menu please 2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows:
Available
- - press and hold press and hold
1. Go to the Dishwasher software menu pressing and holding status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
E E
button (6 sec). – enabled – enabled
options
*)
Duration of
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
-
- -
Available Available wash pro-
press and hold press and hold
status of NaturalDry functionality by pressing
- -
E
– enabled
options options
*) *)
Duration of
To confirm the change and exit from the Control Menu please
- -
- Available Available wash pro-
press and hold
- -
- -
options options
*) *)
Duration of
-
- -
- - Available Available wash pro-
-
- -
-
options options
*) *)
Duration of
- - -
-
- -
Available wash pro-
- -
-
-
- -
options
*)
-
- -
-
- -
-
-
- -
- -
—
-
- -
-
-
- -
-
- -
- -
—
-
-
-
- -
- -
-
- -
-
—
-
- -
-
- -
- -
-
-
- -
-
- -
-
-
- -
-
-
d d
– disabled – disabled
button (3 sec). button (3 sec).
d d
– disabled – disabled
button (3 sec). button (3 sec).
Trajanje Potrošnja
d d
– disabled Duration of – disabled
Water Water
programa vode
wash pro-
consumption consumption
pranja (litara po
button (3 sec). button (3 sec).
gram gram
(litres/cycle) (litres/cycle)
d (h:min)**) ciklusu)
– disabled
Duration of
(h:min) (h:min)
**) **)
Water Water
wash pro-
consumption consumption
button (3 sec).
2:45 2:45 12.0 12.0
3:10 9,5
gram gram
d d
– disabled – disabled (litres/cycle) (litres/cycle)
(h:min) (h:min)
Duration of **) **)
Water Water
wash pro-
button (3 sec). button (3 sec).
2:00 2:00 15.0 15.0
consumption consumption
2:45 2:45 12.0 12.0
1:25 - 3:00 7,0 – 14,0
d d
gram gram
– disabled – disabled
(litres/cycle) (litres/cycle)
Duration of
(h:min) (h:min)
**) **)
Water
wash pro-
button (3 sec). 2:30 button (3 sec). 2:30 15.0 15.0
2:00 2:00 15.0 15.0
consumption
d d
– disabled – disabled
2:45 gram 2:45 12.0 12.0
2:50 17,0
(litres/cycle)
Duration of
(h:min)
**)
Water Water
0:55 0:55 11.5 11.5
wash pro-
button (3 sec). button (3 sec).
2:30 2:30 15.0 15.0
consumption consumption
d 2:00 2:00 15.0 15.0
– disabled
gram gram
2:45 12.0
0:30 9,0
(litres/cycle) (litres/cycle)
Duration of
(h:min) (h:min)
**) **)
Water Water
1:40 1:40 11.5 11.5
button (3 sec). wash pro-
0:55 0:55 11.5 11.5
consumption consumption
2:30 2:30 15.0 15.0
gram gram 2:00 15.0
2:45 2:45 12.0 12.0
1:25 11,5
(litres/cycle) (litres/cycle)
Duration of
(h:min) (h:min)
**) **)
0:10 0:10 Water 4.5 Water 4.5
1:40 wash pro- 1:40 11.5 11.5
consumption consumption
0:55 0:55 11.5 11.5
2:30 15.0
gram 2:00 gram 2:00 15.0 15.0
2:45 2:45 12.0 12.0
1:40 12,0
(litres/cycle) (litres/cycle)
(h:min) 0:50 (h:min) 0:50 8.0 8.0
**) **)
Water
0:10 0:10 4.5 4.5
1:40 1:40 11.5 11.5
consumption
0:55 11.5
2:30 2:30 15.0 15.0
2:00 2:00 15.0 15.0
gram
2:45 2:45 12.0 12.0
3:30 16,0
(litres/cycle)
(h:min)
**)
0:50 0:50 8.0 8.0
0:10 0:10 4.5 4.5
1:40 11.5
0:55 0:55 11.5 11.5
2:30 2:30 15.0 15.0
2:00 2:00 15.0 15.0
2:45 12.0
1 :40 12,0
0:50 0:50 8.0 8.0
0:10 4.5
1:40 1:40 11.5 11.5
0:55 0:55 11.5 11.5
2:30 2:30 15.0 15.0
2:00 15.0
0:12 4,5
0:50 8.0
0:10 0:10 4.5 4.5
1:40 1:40 11.5 11.5
0:55 0:55 11.5 11.5
2:30 15.0
0:50 8,0
0:50 0:50 8.0 8.0
0:10 0:10 4.5 4.5
1:40 1:40 11.5 11.5
0:55 11.5
0:50 0:50 8.0 8.0
0:10 0:10 4.5 4.5
1:40 11.5
0:50 0:50 8.0 8.0
0:10 4.5
0:50 8.0
9 9
9 9
160
button: button:
9
button: button:
button: button:
Potrošnja
Energy Energy
električne
consumption consumption
energije
button:
(kWh/cycle) (kWh/cycle)
(kWh/ciklus)
Energy Energy
consumption consumption
button: button:
0.92 0.92
0,85
(kWh/cycle) (kWh/cycle)
Energy Energy
button: button:
1.35 1.35
consumption consumption
0.92 0.92
0.90 - 1,40
(kWh/cycle) (kWh/cycle)
Energy
1.50 1.50
button: button:
1.35 1.35
consumption
0.92 0.92
1,50
(kWh/cycle)
Energy Energy
1.10 1.10
button:
1.50 1.50
consumption consumption
1.35 1.35
0.92
0,50
(kWh/cycle) (kWh/cycle)
Energy Energy
1.30 1.30
1.10 1.10
consumption consumption
1.50 1.50
1.35
0.92 0.92
1,10
(kWh/cycle) (kWh/cycle)
Energy 0.01 Energy 0.01
1.30 1.30
consumption consumption
1.10 1.10
1.50
1.35 1.35
0.92 0.92
1,20
(kWh/cycle) (kWh/cycle)
0.80 0.80
Energy
0.01 0.01
1.30 1.30
consumption
1.10
1.50 1.50
1.35 1.35
0.92 0.92
1,15
(kWh/cycle)
0.80 0.80
0.01 0.01
1.30
1.10 1.10
1.50 1.50
1.35 1.35
0.92
1,30
0.80 0.80
0.01
1.30 1.30
1.10 1.10
1.50 1.50
1.35
0,01
0.80
0.01 0.01
1.30 1.30
1.10 1.10
1.50
0,85
0.80 0.80
0.01 0.01
1.30 1.30
1.10
0.80 0.80
0.01 0.01
1.30
0.80 0.80
0.01
0.80