IKEA RAGLANDA Manual Del Usuario página 393

button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of the time (1h, 2h, etc. up to max. 12h) from the start of
of time between 1 and 12 hours. of time between 1 and 12 hours.
ENGLISH ENGLISH
will begin counting down. will begin counting down.
DELAY
the selected wash cycle will be increased. the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE
The start time of the program may be delayed for a period
appears on the display; each time you press the button, appears on the display; each time you press the button,
switches off and the wash cycle begins. switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of the time (1h, 2h, etc. up to max. 12h) from the start of
ENGLISH ENGLISH
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
DELAY DELAY
TÜRKÇE will begin counting down. will begin counting down.
the selected wash cycle will be increased. the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE
appears on the display; each time you press the button,
repeatedly until the selected delayed start indicator light repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins. switches off and the wash cycle begins.
of time between 1 and 12 hours. of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
ENGLISH the time (1h, 2h, etc. up to max. 12h) from the start of
DELAY «h» switches off. DELAY «h» switches off.
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
will begin counting down. will begin counting down.
1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
appears on the display; each time you press the button, 2. Select the wash program, press the START/PAUSE appears on the display; each time you press the button,
has been started. has been started.
of time between 1 and 12 hours. repeatedly until the selected delayed start indicator light repeatedly until the selected delayed start indicator light of time between 1 and 12 hours.
Programlar tablosu
switches off and the wash cycle begins. switches off and the wash cycle begins.
the time (1h, 2h, etc. up to max. 12h) from the start of the time (1h, 2h, etc. up to max. 12h) from the start of button and within 4 seconds close the door: the timer
DELAY DELAY
«h» switches off. «h» switches off.
To adjust the delay time and select a shorter period of time, 1. Press the DELAY button: the corresponding «h» symbol To adjust the delay time and select a shorter period of time, 1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased. will begin counting down. the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
The start time of the program may be delayed for a period The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE press the DELAY button. To cancel it, press the button appears on the display; each time you press the button, press the DELAY button. To cancel it, press the button 2. Select the wash program, press the START/PAUSE appears on the display; each time you press the button,
3. Once this time has elapsed, the indicator light «h»
has been started. has been started.
of time between 1 and 12 hours. of time between 1 and 12 hours.
repeatedly until the selected delayed start indicator light the time (1h, 2h, etc. up to max. 12h) from the start of button and within 4 seconds close the door: the timer repeatedly until the selected delayed start indicator light the time (1h, 2h, etc. up to max. 12h) from the start of button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
DELAY
1. Press the DELAY button: the corresponding «h» symbol 1. Press the DELAY button: the corresponding «h» symbol
«h» switches off. the selected wash cycle will be increased. will begin counting down. «h» switches off. the selected wash cycle will be increased. will begin counting down.
To adjust the delay time and select a shorter period of time,
The start time of the program may be delayed for a period
The DELAY function cannot be set once a wash cycle appears on the display; each time you press the button, The DELAY function cannot be set once a wash cycle appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE 3. Once this time has elapsed, the indicator light «h» Program 2. Select the wash program, press the START/PAUSE 3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
Program Program
of time between 1 and 12 hours.
has been started. the time (1h, 2h, etc. up to max. 12h) from the start of has been started. the time (1h, 2h, etc. up to max. 12h) from the start of
switches off and the wash cycle begins. button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased. the selected wash cycle will be increased.
To adjust the delay time and select a shorter period of time, will begin counting down. To adjust the delay time and select a shorter period of time, will begin counting down.
«h» switches off.
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE 2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h» press the DELAY button. To cancel it, press the button press the DELAY button. To cancel it, press the button 3. Once this time has elapsed, the indicator light «h»
The DELAY function cannot be set once a wash cycle
Program Program
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer button and within 4 seconds close the door: the timer
repeatedly until the selected delayed start indicator light switches off and the wash cycle begins. has been started. repeatedly until the selected delayed start indicator light switches off and the wash cycle begins.
Eco Eco
1 Eko 1 1
the selected wash cycle will be increased.
will begin counting down. will begin counting down.
To adjust the delay time and select a shorter period of time, «h» switches off. «h» switches off. To adjust the delay time and select a shorter period of time,
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h» 3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle
Conventional Conventional
button and within 4 seconds close the door: the timer
2 switches off and the wash cycle begins. 2 switches off and the wash cycle begins.
has been started. repeatedly until the selected delayed start indicator light repeatedly until the selected delayed start indicator light has been started.
Program Program
Eco Eco
1 1
2 Otomatik wash and dry wash and dry
will begin counting down.
To adjust the delay time and select a shorter period of time, To adjust the delay time and select a shorter period of time,
«h» switches off. «h» switches off.
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle
Conventional Conventional
Intensive Intensive
3 3
switches off and the wash cycle begins.
has been started. repeatedly until the selected delayed start indicator light has been started. repeatedly until the selected delayed start indicator light
2 2 Program
wash and dry Eco wash and dry Eco
1 1
3 Yoğun To adjust the delay time and select a shorter period of time,
«h» switches off. «h» switches off.
press the DELAY button. To cancel it, press the button The DELAY function cannot be set once a wash cycle The DELAY function cannot be set once a wash cycle
Fast Fast
4 4
repeatedly until the selected delayed start indicator light has been started. has been started.
Intensive Conventional Intensive Conventional
3 3
Program Program
2 2
Eco
«h» switches off. 1
4 Hızlı Yıkama 30'
wash and dry wash and dry
The DELAY function cannot be set once a wash cycle
Sanitizing Sanitizing
5 5
Fast Fast
4 4
has been started.
Conventional
Program Program
5 Hızlı Yıkama
Intensive Intensive
3 3
Eco 2 Eco
1 1
wash and dry
ve Kurutma
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Conventional Conventional Program Program
Fast Fast
4 4
Intensive
3
2 2
1 Eco 1 Eco
6 Cam
wash and dry wash and dry
Self-Clean Self-Clean
7 7
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Conventional Conventional Program
Fast
4
Intensive Intensive
3 3
2 2
Eco Eco
1 1
7 Sessiz
wash and dry wash and dry
Self-Clean Self-Clean
7 7
Pre-Wash Pre-Wash
6 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. 6 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Conventional Conventional Sanitizing
5
Fast Fast
4 4
Intensive Intensive
3 3
2 2
Eco
1
8 Sterili zasyon
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
wash and dry wash and dry
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
Self-Clean Self-Clean
7 7
Pre-Wash
6
Conventional
Sanitizing Sanitizing
5 Pre-treatment of the dishes is not needed before any of the programs. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. 5 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. Pre-treatment of the dishes is not needed before any of the programs.
Fast Fast
4 4
Intensive Intensive
3 3
2
9 Ön Yıkama
wash and dry
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean
7
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
10 Kendi Kendini Fast Fast
4 4
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs. Intensive Pre-treatment of the dishes is not needed before any of the programs.
3
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Temizleme load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many Self-Clean **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many Self-Clean
7 address: dw_test_support@whirlpool.com 7 address: dw_test_support@whirlpool.com
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-Wash Pre-Wash
6 6
Sanitizing Sanitizing
5 5
Fast
4
EKO program verileri, EN 60436:2020 Avrupa Standardı uyarınca laboratuvar koşullarında ölçülür.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
Test Laboratuvarları için not: Karşılaştırmalı EN test koşulları hakkında bilgi için, lütfen şu adrese bir e-posta gönderin:
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
dw_test_support@whirlpool.com Self-Clean Self-Clean
7 7
6 Pre-Wash 6 address: dw_test_support@whirlpool.com Pre-Wash
5 Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many Sanitizing Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Herhangi bir programdan önce bulaşıkları ön işlemden geçirmeye gerek yoktur.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Tüm seçenekler aynı anda kullanılamaz
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration. PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION load, load balancing, additional selected options and sensor calibration.
Self-Clean Self-Clean
7 7
address: dw_test_support@whirlpool.com Pre-Wash address: dw_test_support@whirlpool.com
6
**) Eko programı dışındaki programlar için verilen değerler sadece gösterge niteliğindedir. Gerçek süre; gelen suyun sıcaklığı ve basıncı, oda **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
sıcaklığı, deterjan miktarı, doldurma miktarı ve türü, yük dengeleme, seçili ek seçenekler ve sensör kalibrasyonu gibi birçok faktöre bağlı olarak
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
değişebilir.
Self-Clean
7 PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
address: dw_test_support@whirlpool.com address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019. ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
1. EKO - Eko programı, normal düzeyde kirlenmiş sofra eşyalarını temizlemek için uygundur; bu kullanım için, en verimli enerji ve su Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
tüketimi kombinasyonunu sunan programdır ve AB Ecodesign mevzuatına uygunluğu değerlendirmek için kullanılır.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
address: dw_test_support@whirlpool.com PROGRAMS DESCRIPTION address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
2. OTOMATİK - Kurumuş yemek artıkları içeren normal kirli bulaşıklar için kullanılır. Bulaşıkların üzerindeki kir seviyesini hisseder ve Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs. Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
programı uygun şekilde ayarlar. Sensör, kir seviyesini tespit ederken ekranda bir animasyon belirir ve program süresi güncellenir.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously. *) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
address: dw_test_support@whirlpool.com
3. YOĞUN - Ağır düzeyde kirli bulaşıklar için önerilen program, özellikle de tencere ve tavalar için uygundur (hassas eşyalar için
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many **) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-treatment of the dishes is not needed before any of the programs.
kullanılmaz). factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration. load, load balancing, additional selected options and sensor calibration.
4. HIZLI YIKAMA 30' - Kurumuş yemek kalıntıları olmayan, yarım yüklü hafif kirli bulaşıklar için kullanılacak program. Kurutma
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
aşamasını içermez.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
5. HIZLI YIKAMA VE KURUTMA- Normal düzeyde kirli bulaşıklar. Daha kısa sürede optimum temizleme ve kurutma performansı
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION PROGRAMS DESCRIPTION
sağlayan günlük çevrim.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
6. CAM - Bardaklar ve fincanlar gibi, yüksek sıcaklıklara daha hassas olan bulaşıklara uygun bir program.
PROGRAMS DESCRIPTION
7. SESSİZ - Cihazın gece saatlerinde çalıştırılması için uygundur. En düşük gürültü emisyonuyla optimum temizleme ve kurutma
performansını sağlar.
8. STERİLİZASYON - Normal kirli veya ağır kirli bulaşıklar, tamamlayıcı anti-bakteriyel etki. Bulaşık makinesinin bakımını bakım yapmak
için kullanılabilir.
9. ÖN YIKAMA - Daha sonra yıkanması planlanan bulaşıklara ferahlık kazandırmak için kullanın. Bu program ile deterjan kullanılmaz.
10. KENDİ KENDİNİ TEMİZLEME - Bulaşık makinesinin bakımını gerçekleştirmek için kullanılacak olan programdır; yalnızca bulaşık
makinesi BOŞ iken ve bulaşık makinesi bakımı için tasarlanmış özel deterjanlar kullanılarak çalıştırılacaktır.
Devam eden bir programın değiştirilmesi
Yanlış program seçilirse, programın yeni başlamış olması kaydıyla değiştirilmesi mümkündür: kapağı açın, AÇIK/KAPALI düğmesini basılı tutun,
makine kapanacaktır. AÇIK/KAPALI düğmesini kullanarak makineyi tekrar açın ve yeni yıkama çevrimini ve istediğiniz seçenekleri seçin; BAŞLAT/
Duraklat düğmesine basarak ve 4 saniye içerisinde kapağı kapatarak yıkama çevrimini başlatın.
4 saniyeden fazla sürerse, cihaz otomatik olarak duraklar ve son işlemi tekrarlayarak cihazı yeniden başlatmanız gerekir.
Ekstra bulaşık ekleme
Makineyi kapatmadan kapağını açın (BAŞLAT/Duraklat LED'i yanıp sönmeye başlar) (SICAK buhara dikkat edin!) ve bulaşıkları bulaşık makinesinin
içine yerleştirin. BAŞLAT/Duraklat düğmesine basın ve 4 saniye içerisinde kapağı kapatın, çevrim kesintiye uğratıldığı noktadan devam edecektir.
Yanlışlıkla kesintiye uğratma
Yıkama çevrimi sırasında kapak açılırsa veya elektrik kesintisi meydana gelirse, çevrim duraklatılır. BAŞLAT/Duraklat düğmesine basın ve 4 saniye
içerisinde kapağı kapatın, çevrim kesintiye uğratıldığı noktadan devam edecektir.
Available
options
Available
50° 50°
50°
options
Available
55° 55°
50°-60° 50° 50°
options
65° 65° - -
55° 55°
50° 50°
65°
- -
50° 50° - -
Available
65° 65° - -
55° 55°
options
50°
50° -
65° 65° - -
Available
- -
50° 50° - -
65° 65° - -
55° options
50° 50°
50°
- -
- - - -
65° 65° - -
Available
- -
50° 50° - -
65° -
55° 55° options
50° 50°
45°
- -
65° 65° - -
- -
- - - -
Available
65° 65° - -
-
50° -
65° 65° - -
55° 55°
options
50° 50°
50°
- -
65° 65° - -
- -
- - - -
65° -
- -
50° 50° - -
65° 65° - -
55° 55°
50°
65° -
- -
65° 65° - -
-
- -
65° 65° - -
- -
50° 50° - -
65° 65° - -
55°
- - -
-
65° -
- -
- - - -
65° 65° - -
- -
50° 50° - -
65° -
65° - -
- -
65° 65° - -
- -
- - - -
65° 65° - -
-
50° -
- -
65° 65° - -
- -
- - - -
65° -
- -
65° 65° - -
-
- -
-
65° -
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
NaturalDry NaturalDry
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec-
NaturalDry
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
button (6 sec). button (6 sec).
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change Door opening system NaturalDry is a convection drying system 2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
NaturalDry NaturalDry
added together with the dishwasher. To see how to mount protec- E added together with the dishwasher. To see how to mount protec- E d d
– enabled ensure exceptional drying performance every day. Door opens at – enabled – disabled – disabled
button (6 sec). button (6 sec).
tion foil please refer to (INSTALLATION GUIDE). tion foil please refer to (INSTALLATION GUIDE).
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
Door opening system NaturalDry is a convection drying system the temperature that is safe to your kitchen furniture. Door opening system NaturalDry is a convection drying system
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
press and hold As additional steam protection, special designed protection foil is press and hold button (3 sec). button (3 sec).
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
NaturalDry NaturalDry
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
E E d d
– enabled – enabled – disabled – disabled
button (6 sec). button (6 sec).
the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture. tion foil please refer to (INSTALLATION GUIDE).
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
which automatically opens the door during/after drying phase to As additional steam protection, special designed protection foil is which automatically opens the door during/after drying phase to As additional steam protection, special designed protection foil is
press and hold press and hold button (3 sec). button (3 sec).
NaturalDry NaturalDry
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec- added together with the dishwasher. To see how to mount protec- 1. Go to the Dishwasher software menu pressing and holding
ensure exceptional drying performance every day. Door opens at ensure exceptional drying performance every day. Door opens at
Yıkama
E E d d
– enabled – enabled Duration of – disabled Duration of – disabled
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE). the temperature that is safe to your kitchen furniture. the temperature that is safe to your kitchen furniture. tion foil please refer to (INSTALLATION GUIDE).
Door opening system NaturalDry is a convection drying system Door opening system NaturalDry is a convection drying system
Mevcut programının
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows: Available NaturalDry functionality could be disabled by the user as follows: 2. You switched to NaturalDry Control Menu, you could change wash pro- wash pro-
As additional steam protection, special designed protection foil is As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to which automatically opens the door during/after drying phase to
consumption
işlevler (*) süresi
NaturalDry press and hold press and hold button (3 sec). button (3 sec).
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding
ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec- options ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec- gram gram
*) *)
(litres/cycle)
E d (s:dk)**)
– enabled – disabled
tion foil please refer to (INSTALLATION GUIDE). button (6 sec). tion foil please refer to (INSTALLATION GUIDE). button (6 sec).
the temperature that is safe to your kitchen furniture. Door opening system NaturalDry is a convection drying system the temperature that is safe to your kitchen furniture.
Duration of Duration of
(h:min) (h:min)
**) **)
2. You switched to NaturalDry Control Menu, you could change 2. You switched to NaturalDry Control Menu, you could change To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows: As additional steam protection, special designed protection foil is NaturalDry functionality could be disabled by the user as follows: As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
Available wash pro- wash pro-
consumption
press and hold button (3 sec).
1. Go to the Dishwasher software menu pressing and holding status of NaturalDry functionality by pressing 1. Go to the Dishwasher software menu pressing and holding status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec- ensure exceptional drying performance every day. Door opens at added together with the dishwasher. To see how to mount protec-
2:45 2:45
3:10
options gram gram
*) *)
E E d d
– enabled – enabled – disabled – disabled (litres/cycle)
tion foil please refer to (INSTALLATION GUIDE). button (6 sec). tion foil please refer to (INSTALLATION GUIDE). button (6 sec).
the temperature that is safe to your kitchen furniture.
(h:min) (h:min)
Duration of Duration of **) **)
To confirm the change and exit from the Control Menu please 2. You switched to NaturalDry Control Menu, you could change To confirm the change and exit from the Control Menu please 2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows: NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
Available wash pro- wash pro-
press and hold press and hold button (3 sec). button (3 sec).
status of NaturalDry functionality by pressing status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec- 1. Go to the Dishwasher software menu pressing and holding 1. Go to the Dishwasher software menu pressing and holding 2:00 2:00
consumption
2:45 2:45
1:25 - 3:00
E E d d
options gram gram
button (6 sec). – enabled *) button (6 sec). – enabled *) – disabled – disabled
tion foil please refer to (INSTALLATION GUIDE).
(litres/cycle)
Duration of
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change NaturalDry functionality could be disabled by the user as follows: 2. You switched to NaturalDry Control Menu, you could change (h:min) (h:min)
**) **)
Available 2:30 wash pro- 2:30
press and hold status of NaturalDry functionality by pressing press and hold status of NaturalDry functionality by pressing button (3 sec). button (3 sec).
1. Go to the Dishwasher software menu pressing and holding
2:00 2:00
E E d d
button (6 sec). – enabled – enabled – disabled – disabled
options 2:45 gram 2:45
*) 2:50
Duration of Duration of
To confirm the change and exit from the Control Menu please To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
(h:min)
**)
0:55 0:55
Available wash pro- wash pro-
press and hold status of NaturalDry functionality by pressing press and hold button (3 sec). button (3 sec).
2:30 2:30
consumption
E d
2:00 2:00
– enabled – disabled
options gram gram
*) *)
2:45
0:30
(litres/cycle)
Duration of Duration of
To confirm the change and exit from the Control Menu please
(h:min) (h:min)
**) **)
1:40 1:40
Available wash pro- wash pro-
press and hold button (3 sec).
0:55 0:55
consumption
2:30 2:30
options gram gram 2:00
*) *)
2:45 2:45
1:25
(litres/cycle)
Duration of Duration of
(h:min) (h:min)
**) **)
0:10 0:10
1:40 1:40
Available wash pro- wash pro-
consumption
0:55 0:55
2:30
options gram 2:00 gram 2:00
*) *) 2:45 2:45
1:40
(litres/cycle)
Duration of
(h:min) 0:50 (h:min) 0:50
**) **)
0:10 0:10
wash pro-
1:40 1:40
consumption
0:55
2:30 2:30
2:00 2:00
gram
*) 2:45 2:45
3:30
(litres/cycle)
(h:min)
**)
0:50 0:50
0:10 0:10
1:40
0:55 0:55
2:30 2:30
2:00 2:00
2:45
1:40
0:50 0:50
0:10
1:40 1:40
0:55 0:55
2:30 2:30
2:00
0:12
0:50
0:10 0:10
1:40 1:40
0:55 0:55
2:30
0:50
0:50 0:50
0:10 0:10
1:40 1:40
0:55
0:50 0:50
0:10 0:10
1:40
0:50 0:50
0:10
0:50
9 9
9 9
button: button:
9
button: button:
button: button:
Su
Water Water Energy Energy
tüketimi tüketimi
consumption consumption consumption
button:
(litre/çevrim) (kWs/çevrim)
(litres/cycle) (kWh/cycle) (kWh/cycle)
Water Water Energy Energy
consumption consumption consumption
button: button:
12.0 12.0 0.92 0.92
9.5
(litres/cycle) (kWh/cycle) (kWh/cycle)
Water Water Energy Energy
button: button:
15.0 15.0 1.35 1.35
consumption consumption consumption
12.0 12.0 0.92 0.92
7.0 - 14.0 0.90 - 1,40
(litres/cycle) (kWh/cycle) (kWh/cycle)
Water Energy
15.0 15.0 1.50 1.50
button: button:
15.0 15.0 1.35 1.35
consumption consumption
12.0 12.0 0.92 0.92
17.0
(litres/cycle) (kWh/cycle)
Water Water Energy Energy
11.5 11.5 1.10 1.10
button:
15.0 15.0 1.50 1.50
consumption consumption consumption
15.0 15.0 1.35 1.35
12.0 0.92
9.0
(litres/cycle) (kWh/cycle) (kWh/cycle)
Water Water Energy Energy
11.5 11.5 1.30 1.30
11.5 11.5 1.10 1.10
consumption consumption consumption
15.0 15.0 1.50 1.50
15.0 1.35
12.0 12.0 0.92 0.92
11.5
(litres/cycle) (kWh/cycle) (kWh/cycle)
Water 4.5 Water 4.5 Energy 0.01 Energy 0.01
11.5 11.5 1.30 1.30
consumption consumption consumption
11.5 11.5 1.10 1.10
15.0 1.50
15.0 15.0 1.35 1.35
12.0 12.0 12.0 0.92 0.92
(litres/cycle) (kWh/cycle) (kWh/cycle)
8.0 8.0 0.80 0.80
Water Energy
4.5 4.5 0.01 0.01
11.5 11.5 1.30 1.30
consumption
11.5 1.10
15.0 15.0 1.50 1.50
15.0 15.0 1.35 1.35
12.0 12.0 0.92 0.92
16.0
(kWh/cycle)
8.0 8.0 0.80 0.80
4.5 4.5 0.01 0.01
11.5 1.30
11.5 11.5 1.10 1.10
15.0 15.0 1.50 1.50
15.0 15.0 1.35 1.35
12.0 12.0 0.92
8.0 8.0 0.80 0.80
4.5 0.01
11.5 11.5 1.30 1.30
11.5 11.5 1.10 1.10
15.0 15.0 1.50 1.50
15.0 1.35
4.5
8.0 0.80
4.5 4.5 0.01 0.01
11.5 11.5 1.30 1.30
11.5 11.5 1.10 1.10
15.0 1.50
8.0
8.0 8.0 0.80 0.80
4.5 4.5 0.01 0.01
11.5 11.5 1.30 1.30
11.5 1.10
8.0 8.0 0.80 0.80
4.5 4.5 0.01 0.01
11.5 1.30
8.0 8.0 0.80 0.80
4.5 0.01
8.0 0.80
393
Enerji
0.85
1.50
0,50
1.10
1,20
1.15
1.30
0.01
0.85