Create Wind Century Manual De Instrucciones página 13

1. Lift the finial up to the mounting bracket and align the loosened screws in the mounting
bracket with the holes in the finial.
2. Turn the finial to adjust and reinsert the screws.
3. Secure the screws with the help of a screwdriver.
4. Then lift the decorative cover towards the rosette so that it is fixed with the built-in magnet.
Advice: Another person should help you hold the ladder and hand you the fan once you are
on the ladder.
M OUN T IN G TH E B L AD E S
* Model WITHOUT LIGHT
* Model WITH LIGHT
Align the holes in the blade holder with the holes in the blades and motor body and screw
them into place, but do not tighten the screws until they are all in place and screwed in.
Advice: To save time, you can place the washers on each screw before installing the blades.
MOU NT IN G TH E D ECO R AT IVE COVE R
* Only for the model WITHOUT LIGHT
Align the decorative plate with the iron motor cover and tighten it clockwise.
E NGLI SH
13