Chasing M2 PRO MAX Manual Del Usuario página 6

6
Drop the ROV into Water
Grasp the grips on both sides of the ROV with both hands and gently throw the ROV into
the water.Unlock the Thruster(motors) to dive. For a better experience, it is
recommended to ensure that the water depth exceeds 1 meter.
EN
Video and Photo Download
1 Download to Phone/Tablet
1） Refer to Step 4 to connect the remote
controller to your phone/tablet.
2） Open CHASING GO1 App, click the Media
button in the lower right corner.
3） Find the video/photo that you want to
download. Click the download button and
the image will be saved directly to the
phone/tablet's photo album (Download
folder).
2 Download to Computer
(laptop or the computer which could use Wi-Fi)
1） Open the web browser and type IP ad-dress:192.168.1.88
2） Find the video/photo that you want to download. Click the download icon and
save, then the images will generally save in the Download folder.
3） It is recommended to use Firefox or Google Chrome browser for better experience.
4） To ensure the smooth download of
videos and photos, we recommend
that you use Mozilla Firefox or
Google Chrome.
09
Connected
Start
Media
Device Media
Device Media
Media
Not secure | 192.168.1.88
1/11
Micro SD card copy
1） Remove the cover on the micro
SD card socket counter clockwise,
then open the waterproof rubber
plug， and gently press the micro SD
card. It will pop up automatically,
then emove the micro SD card.
2） Read the micro SD card in a Card
reader, and copy the images with
computer.
3） Insert the micro SD card back to the micro SD card socket after copying the images,
press gently to ensure the micro SD card and waterproof rubber plug are locked, and
tighten the cover clockwise downward.
Disassemble and Install the
Battery compartment
Disassemble:
1
1） Turn the knobs on both sides of the fuselage 90°
to the shallow card slot①；
2） Turn the switch on the slider to the left②, and
pull the lock assembly upwards while holding
the chute ③；
3） Pull the lower sides of the pressure plat④, by
hand, pull down to deform the pressure plate ,
and make the buckle come off the rear bracket.
4） Pull the Battery compartment slowly to pull it out⑤.
Install:
2
1） Rotate the knobs on the both sides of the fuselage
90 ° to the deep card slot；
2） Slowly install the Battery compartment along the
chute under the fuselage. Press down hard until
you hear a "click" sound, and the knobs close in
place.
3） Pull the lower sides of the Pressure Plate by hand,
pull down to deform the Pressure Plate ③, make
the buckle fasten on the rear bracket;
4） Press down firmly on the chute of the locking
assembly. When you hear a "click" sound, the
buckle is snapped into place properly, then the
installation is complete.
EN
5
4
2
3
1
10