Descargar Imprimir esta página

Temperature Scale Selection; Storing Of The Remote Control; Cleaning And Maintenance; Cleaning The Housing - Bosch Cool 4000 Instrucciones De Montaje Y Uso

Acondicionador local de aire
Ocultar thumbs Ver también para Cool 4000:

5.2.10 Temperature scale selection

The temperature can be displayed in °C or °F.
▶ To change the temperature unit of measure, press the °C/F°
button.
The selected scale °C or °F will appear on the display of the
controller and on the control panel.

5.2.11 Storing of the remote control

The remote control can be stored safely at the back of the
appliance. The integrated magnet is holding it into place.
Fig. 18
Cool 4000 – 6721858458 (2023/04)
ºC/F
0010047636-001
6

Cleaning and maintenance

Before cleaning or maintenance, turn the appliance off by
pressing the
button, then unplug the power supply cable.
6.1

Cleaning the housing

The appliance shall be cleaned with an oil-free cloth or a slightly
damp cloth (damped with water or a solution of warm water and
mild liquid detergent). Then, it should be dried with a dry cloth.
Be sure to wring excess water from the cloth before wiping
around the controls. Excess water in or around the controls may
cause damage to the appliance.
For safety reasons, never wash the appliance with water.
CAUTION
▶ Never use harsh cleaners, petrol, alcohol, solvents, wax or
polish to clean the appliance.
▶ Never spray insecticide liquids or similar.
6.2

Cleaning the filter

To maintain the efficiency of the appliance, it is recommended
to clean the dust filters regularly. The frequency depends on the
duration and conditions of operation. If the appliance is used
frequently, it is recommended to clean the filters every 2
weeks.
Cleaning and maintenance
91
loading