Product Identification; Noise Information; Installation; Installation Site - Bosch Cool 4000 Instrucciones De Montaje Y Uso

3.5

Product identification

Data plate
The data plate contains performance data, approval data and
the serial number of the product.
The data plate can be found on the backside of the product.
3.6

Noise information

In order for the appliance to work, it produces some noises that
are considered normal and should, therefore, be known by the
user.
Rushing air sound
At the top of the appliance, a sound of rushing air being moved
by the fan can be heard.
Gurgle/hiss
A quiet gurgling or hissing noise is normal during operation.
This is caused by the flow of refrigerant.
High-pitched sound
High efficient compressors may produce high-pitched sound
during air conditioning operation.
However, if the appliance vibrates and makes noise due to the
vibration, ensure the appliance is positioned in a levelled floor.
4

Installation

4.1

Installation site

• The appliance should be installed and operated in a room
with a floor area larger than 12 m².
• The appliance shall be installed in an accessible location for
installation, repair and maintenance works.
• Make sure the installation site can bear the weight of the
appliance and vibrations.
• Make sure the area is well ventilated.
• Make sure the appliance is stable and level to minimize
noise and vibration.
• Maintain a minimum distance of 60 cm from walls and
obstacles.
• Do not cover the air inlets and outlets of the appliance.
• Avoid places subject to noise and resonance.
• Avoid places subject to strong artificial electric/magnetic
fields.
• Avoid severe natural conditions (e.g. heavy lampblack,
strong sandy wind, direct sunshine or high temperature
heat sources).
Cool 4000 – 6721858458 (2023/04)
• The ambient temperature shall range between 16-35°C.
• Protect the room from direct exposure to the sun by
partially closing curtains and/or blinds to make the
appliance more efficient.
• Avoid places of inflammable or explosive gas leakage or
where there are strong aggressive gases.
• The plug should be easily accessible after installation.
4.2

Handling the integrated exhaust hose

The exhaust hose is integrated on the back of the appliance to
allow a hassle-free handling and convenient storage.In air
conditioning modes and, if required, in dehumidification mode,
the exhaust air hose must be used to let the hot air out.
• To extend the hose, pull it upwards to the desired length.
• To bring it back to the initial position, push it downwards.
Fig. 4
Do not arbitrarily bend or stretch the exhaust hose. This will
affect the cooling efficiency. However, the hose can be
moderately compressed and tensed according to the actual
installation needs.
The hose can be compressed to 300 mm minimum and
extended up to 1500 mm maximum. It is recommended to keep
the hose length to a minimum length.
Installation
0010048825-001
81