Operating The Remote Controller; Battery Installation/Replacement; Handling Of The Remote Controller; Button Names And Functions - Bosch Cool 4000 Instrucciones De Montaje Y Uso

5.2

Operating the remote controller

5.2.1 Battery installation/replacement

▶ Push to slide the battery cover at the back of the remote
controller downwards.
▶ Lift up from the lower end of the battery cover to open it.
Fig. 14 Open the battery cover
▶ Install or replace the two AAA batteries according to the
positive and negative polarities indicated.
Fig. 15 Replacement of the batteries
▶ Close the battery cover.
▶ Slide the battery cover back into place.

5.2.2 Handling of the remote controller

▶ Direct the transmitting part of the remote controller to the
receiving part of the appliance, located in the upper part of
the front panel.
If something blocks the transmission and reception path of the
appliance and the remote controller, such as curtains for
example, it does not work.
The transmission distance is approx. 5 m.
NOTICE
▶ Do not drop or get the remote controller wet.
▶ Never press the buttons of the remote controller with a
hard, pointed object.
Cool 4000 – 6721858458 (2023/04)

5.2.3 Button names and functions

0010047569-001
0010047570-001
Fig. 16
No. Button
[1]
[2]
ºC/F
[3]
[4]
[5]
[6]
[7]
1
11
10
9
8
Overview of the remote controller
Function
Power button Switch on/off the appliance
(On/Stand-by)
Temperature Change the temperature scale
scale button on the remote control and the
control panel (Celsius or
Fahrenheit)
Timer button Adjust the timer (programmed
time)
Sleep mode Turn on the sleep mode
button
Silent mode Turn on the silent mode
button
Fan speed Adjust the fan speed setting
selection
button
Mode selection Set operating mode (air
button conditioning,
dehumidification, fan)
Operation
2
3
4
5
6
7
0010047571-001
87