Button Names And Functions; Switching On/Off; Smart Cool Select Modes - Bosch Cool 4000 Instrucciones De Montaje Y Uso
Acondicionador local de aire
5.1.3 Button names and functions
No. Button/indicator
[1]
Auto mode
button
[2]
Silent mode
button
[3]
Sleep mode
button
[4]
Mode selection
button
[6]
Up/Increase
button
[7]
Down/
Decrease
button
[8]
Fan speed
selection
button
[9]
Swing button
[10
Power button
]
(On/Stand-by)
Table 5
Button names and functions
5.1.4 Switching ON/OFF
▶ Insert the plug of the appliance in the power socket.
▶ Press
to switch on the appliance.
The appliance starts operating in the same mode and settings
as when it was turned off.
▶ Press the
button to put the appliance in stand-by.
Note
•
For optimum performance of the appliance, leave a door/
window slightly open (as little as 1 cm) to guarantee proper
ventilation.
•
Keep curtains away from the air inlet or air outlet.
•
Never turn off the appliance by simply pulling the plug.
•
Press the
button in order to put your appliance in stand-
by and wait a few minutes before pulling the plug. In this
manner, the appliance can perform the operating status
checks.
Cool 4000 – 6721858458 (2023/04)
Function
Turn on the auto mode
Turn on the silent mode
Turn on the sleep mode
Set operating mode (air
conditioning,
dehumidification, fan)
Adjust the temperature setting
upwards
Adjust the temperature setting
downwards
Adjust the fan speed setting
Turn on/off the air outlet flap
swing function. The flap will
swing up and down.
Switch on/off the appliance
•
If you turn the appliance off and immediately restart it,
allow four minutes for the compressor to restart. There is an
electronic device in the appliance that keeps the
compressor turned off for four minutes for safety.
Auto restart
If the appliance shuts off unexpectedly due to a power outage,
it will restart with the previously set function automatically
when the power resumes. The compressor will restart after four
minutes.
5.1.5 Smart cool select modes
The appliance has three automated air conditioning modes
(Auto, Silent and Sleep mode).
Auto mode
•
In Auto mode, the appliance automatically controls and
adjusts the cooling performance in accordance to the
desired (selected) temperature and the environmental
conditions.
•
To Select the Auto mode, press the
will show the temperature to be reached. To change the
desired temperature press the
•
In this mode, the air exhaust hose must be used to let the
hot air out.
Silent mode
•
In Silent mode, the appliances operates quietly at the
lowest possible noise level, while automatically controls
and adjusts the cooling performance in accordance to the
desired (selected) temperature and the environmental
conditions.
•
To select the Silent mode, press the
will show the temperature to be reached. To change the
desired temperature press the
•
In this mode, the air exhaust hose must be used to let the
hot air out.
Operation
button. The display
or
button.
button. The display
or
button.
85
