Dometic COOLAIR RTX1000 Instrucciones De Uso página 24

Cleaning and care
Display
Description
text
F13 The system cannot
determine the external
temperature.
F14
F15 The system cannot
determine the compressor
temperature.
F16
F17 The compressor
temperature is too high.
F18 –
F19 –
F20
The system reports a
(temporary) electrical
overload.
F21 The control PCB is not
working.
F22 The display board is not
working.
9 Cleaning and care
Please observe the following tips for the cleaning and care of your parking cooler.
A
NOTICE! Damage hazard
Do not use abrasive cleaning agents or hard objects or inflammable
agents during cleaning as these can damage the appliance.
A
NOTICE!
The parking cooler must not be cleaned with a high-pressure cleaner.
24
Cause
Error in temperature sensor
electrical supply (open
circuit).
Error in temperature sensor
electrical supply (short
circuit).
Error in temperature sensor
electrical supply (open
circuit).
Error in temperature sensor
electrical supply (short
circuit).
Compressor thermal
overload
–
–
The system's current power
requirement is too high.
Control PCB
communication error
Display board
communication error (fault
in the connecting cable
between the display and
control board)
RTX1000/2000, SPX1200
Remedy
➤ Switch off the system.
➤ Switch it on again after
30 min.
➤ If the fault occurs again,
contact an authorized
workshop.
EN