Button And Indicator Names And Functions; Switching On/Off; Smart Cool Select Modes - Bosch Cool 2000 Instrucciones De Montaje Y Uso

Operation

5.1.2 Button and indicator names and functions

No. Button/indicator
[2] Up/Increase
button
[3] Low fan speed
indicator
[4] Mid fan speed
indicator
[5] High fan speed
indicator
[6] Auto fan speed
indicator
[9] Power button
(On/Stand-by)
[10] Swing button
[11] Fan speed
selection
button
[12] Down/
Decrease
button
[13] Mode selection
button
[14] Sleep mode
button
[15] Silent mode
button
[16] Auto mode
button
[20] Air conditioning
indicator
[21] Dehumidificatio
n indicator
[22] Fan indicator
Table 4 Button names and functions
84
Function
Adjust the temperature
setting upwards
Indicate the fan speed is on
low level
Indicate the fan speed is on
mid level
Indicate the fan speed is on
high level
Indicate the fan speed is
controlled automatically
Switch on/off the appliance
Turn on/off the air outlet flap
swing function. The flap will
swing up and down.
Adjust the fan speed setting
Adjust the temperature
setting downwards
Set operating mode (air
conditioning,
dehumidification, fan)
Turn on the sleep mode
Turn on the silent mode
Turn on the Auto mode
Indicate the Air conditioning
mode is on/off
Indicate the Dehumidification
mode is on/off
Indicate the Fan mode is on/
off

5.1.3 Switching ON/OFF

▶ Insert the plug of the appliance in the power socket.
▶ Press to switch on the appliance.
The appliance starts operating in the same mode and settings
as when it was turned off.
▶ Press the button to put the appliance in stand-by.
Note
• For optimum performance of the appliance, leave a door/
window slightly open (as little as 1 cm) to guarantee proper
ventilation.
• Keep curtains away from the air inlet or air outlet.
• Never turn off the appliance by simply pulling the plug.
• Press the button in order to put your appliance in stand-
by and wait a few minutes before pulling the plug. In this
manner, the appliance can perform the operating status
checks.
• If you turn the appliance off and immediately restart it,
allow four minutes for the compressor to restart. There is an
electronic device in the appliance that keeps the
compressor turned off for four minutes for safety.
Auto restart
If the appliance shuts off unexpectedly due to a power outage,
it will restart with the previously set function automatically
when the power resumes. The compressor will restart after four
minutes.

5.1.4 Smart cool select modes

The appliance has three automated air conditioning modes
(Auto, Silent and Sleep mode).
Auto mode
• In Auto mode, the appliance automatically controls and
adjusts the cooling performance in accordance to the
desired (selected) temperature and the environmental
conditions.
• To Select the Auto mode, press the
will show the temperature to be reached. To change the
desired temperature press the
• In this mode, the air exhaust hose must be used to let the
hot air out.
Cool 2000 – 6721858239 (2023/04)
button. The display
or button.