Draining The Appliance; Continuous Drainage; Draining The Internal Tank - Bosch Cool 2000 Instrucciones De Montaje Y Uso

Cleaning and maintenance
6.3

Draining the appliance

This appliance is provided with an auto-evaporation feature for
condensate removal during air conditioning and
dehumidification mode.

6.3.1 Continuous drainage

If required (e.g. in case of high ambient humidity), it is possible
to drain the condensate continuously by applying the hose
supplied to the upper drainage outlet. To do so follow the steps
below:
▶ Remove the cap from the upper drainage outlet turning it
counter-clockwise.
▶ Remove the plug.
Make sure the water does not overflow onto the floor and the
drainage tube is not obstructed.
▶ Attach the drain hose to the hole.
92
▶ Place the other end of the hose in the drainage recipient or
other drain area.
Fig. 24
Be sure to reinstall the plug and cap firmly to prevent leakage
before using the appliance.

6.3.2 Draining the internal tank

The appliance is equipped with an internal tank which is
collecting excess condensate. When the water level of the
internal tank reaches predetermined level, the display will show
"FL".
To empty the tank follow the steps below.
0010047577-001
▶ Remove the cap from the lower drainage outlet turning it
counter clockwise.
Cool 2000 – 6721858239 (2023/04)
0010047578-001