OPERATING INSTRUCTIONS
WARNING
charger in fluid or allow a fluid to flow inside them . Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach or bleach-containing products, etc. can
cause a short circuit.
WARNING
parts could result in serious personal injury.
WARNING
modification is misuse and could result in a hazardous condition leading to possible serious
injury.
WARNING
assembling parts, making adjustments, cleaning, or when not in use .
WARNING
serious injury.
This router must be used only with the battery packs and chargers listed below:
Battery pack
2Ah
2.5Ah
BY519701
BY519703
BY519702
BY5100B-00
Please refer to the battery and charger manuals for detailed safety and operating
NOTICE
instructions."
SOFT START FEATURE
The soft-start feature minimizes torque twist, which is customary in router motors, by limiting
the speed at which the motor starts. This increases the life of the motor.
ON/OFF SWITCH (Fig. 7)
To turn the tool on, press the "I" (on) side of
the on/off switch down.
To turn the tool off, press the "O" (off) side of
the on/off switch down.
Always hold the tool and cutter bit away from
the workpiece when operating the switch.
16
To reduce the risk of fire, personal injury, and product damage due to
a short circuit, never immerse your power tool, battery pack, or
If any parts are damaged or missing, do not operate this product until
the parts are replaced . Use of this product with damaged or missing
Do not attempt to modify this power tool or create accessories not
recommended for use with this power tool . Any such alteration or
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the power tool when
Do not allow familiarity with this product to make you careless .
Remember that a careless fraction of a second is sufficient to inflict
4Ah
BY519601
BY5140B-00
5Ah
BY519603
Fig . 7
On/Off Switch
O I
Charger
SC535801
QC536001
SC5358B-02
QC5359B-02
SC0030B-00