Beginning Work With The Machine - Taski Swingo 2500 Manual Del Usuario

Dosing:
Attention:
Wear gloves, goggles and appropriate
(protective) working clothes when han-
dling chemical products!
Notice:
Use chemical products recommended by
Diversey only and always observe the
product information.
Attention:
The use of inappropriate products (e.g.
products containing chlorine or acid) may
damage or destroy the machine.
Dosing examples:
Information on the package
of the product
0.5% 50ml for 10l
of water
1% 100 ml for 10l
of water
2% 200 ml for 10l
of water
3% 300 ml for 10l
of water
• Fill the appropriate product into the dosing cup and pour
the content into the fresh water tank (Flextank). Repeat the
procedure until the required dosing is reached.
• The dosing cup remains in the Flextank after dosage.
Notice:
TASKI offers an automatic dosage feature
as an option. It is possible to mount it addi-
tionally. Please contact your customer ser-
vice.
Pre-cleaning
Attention:
Remove any objects (wooden, metal parts
etc.) from the cleaning surface.
The objects could be catapulted by the ro
tating tool, and thereby cause injuries to
people and damage to the environment.
64
Tank capaci- Product vol-
ty ume per tank
filling
92l 0.46l
92l 0.92l
92l 1.84l
92l 2.76l

Beginning work with the machine

Attention:
Always wear slip-resistant shoes and ap-
propriate working clothes when working
with this machine!
Notice:
When operating the machine, always
place both hands on the steering wheel to
ensure a safe operation of the machine.
Attention:
Start familiarization with the machine by
making your first driving attempts in a free
area.
• Sit down on the driver seat.
• Switch on the machine (key switch).
The display lights up briefly.
• Release the stopping brake.
Manual program start
Notice:
The cleaning program last used is saved in
the memory.
Notice:
To protect the environment, you should
calculate the lowest level that is sufficient
for good cleaning results.
-
• Press the Suction unit ON/OFF but-
ton.
The display lights up, the suction mo
tor starts and the suction nozzle is
automatically lowered to the operat
ing position.
• Press the Cleaning solution supply
ON/OFF button.
The display lights up.
The cleaning solution supply is start
ed when the brushes rotate.
• Select the desired dosing by press-
ing the +/- buttons from level 1-7.
• Press the Brush drive ON/OFF but-
ton.
The display lights up and the brush
unit is lowered.
• Select the desired brush pressure by
pressing the +/- buttons from level 1-
4.
-
-
-