PEUGEOT PV-R592 Manual De Usuario página 26

• Noisy operation
• The robot is in
trouble when
working
• Driving wheel
alarms
• The cleaning
ability is reduced
or the ash
dropped
• When the robot
is working, there
are some problems,
such as route
disorder,deviation,
repeated cleaning
and small area not
cleaned
• Not cleaning as
scheduled
• LDS Laser
sensor abnormal
26
- The dust baffle at the air
inlet of the dust box is stuck
The suction is at high level
- The robot is entangled or
obstructed by scattered
wires, drooping curtain cloth
or carpet tassels on the
ground
- The main engine may be
jammed by furniture of similar
height to the robot
- The driving wheel is
entangled with something
and stuck
- The dust box is full;
The filter net is blocked
The roller brush is entangled
- The wires, slippers and
other objects placed on the
ground affect the normal
work of the Robot
- When the robot climbs the
steps, threshold and door
strip, the driving wheel
slipped with the ground,
which will affect the judgment
on the environment of the
whole house
- Working on a newly waxed,
polished floor or smooth tile
reduces the friction between
the driving wheel and the
ground
- Due to the different house
environment, the robot can
not enter some areas
- Scheduled appointment
cancelled Low power
The robot is in Do Not Disturb
mode
- The laser sensor is blocked
or stuck by something
Take out the dust box and adjust
the dust baffle to ensure its
flexible movement.
It is suggested that users can
choose lower or mute suction
power for cleaning when they
are at home and use high-grade
suction power when they go out
The robot will try all kinds of
ways to get rid of the trouble, if
not, it is recommended to help it
manually
The robot will try all kinds of
ways to get rid of the trouble, if
not, it is recommended to help it
manually
Turn off the robot and put the
bottom up; first turn the wheel
counterclockwise and then
clockwise to turn out the debris
and garbage stuck in it; then
press and slide the driving wheels
on both sides at the same time to
check whether it can rotate and
whether it can rebound after
releasing
Clean the dust box
Clean the filter net
Clean the roller brush
Before the robot works, please
tidy up the scattered wires,
slippers and other objects on the
ground, and reduce the scattered
objects on the ground as much
as possible. If there is uncleaned
area, the robot will clean the area
independently. Please do not
interfere (such as moving the
robot or blocking its route)
It is recommended to close the
door of the area and clean the
area separately.
After cleaning, it will return to the
starting point. Please rest assured
to use it
It is recommended that you wait
for the floor wax to dry before
using
It is suggested to tidy up the
home environment to ensure that
the Robot can enter for cleaning
Reset appointment Charge the
robot
It will not follow scheduled
cleaning in Do Not Disturb (DND)
mode, you can adjust the DND
time in the APP or clean at other
times
Please turn off and clean it.