Warm tips: for the first time, please follow the Robot through the
whole process to help eliminate some unfriendly small problems,
so that it can clean smoothly. When follow the Robot, please be
careful not to stand in front of it.
Power on / pause / sleep
• Cleaning mode: The Robot is at working
status; the white light of the Start/Paus button
is ON.
• Standby mode: the power switch is on, the
white light of the Start/Pause button is always
on, and the Robot is at static status.
• Sleep mode: the power switch is on, the light
of the Start/Pause is off, and the Robot is at
static status.
• Power ON
Make sure that the Power Switch at side of the
Robot is ON. Press the Start button of the
Robot to
ton in APP to start cleaning or switch Cleaning
mode. (3 cleaning modes: Full Cleaning, Room
Cleaning and Zone Cleaning)
• Pause
When Robot is working, press the Start button
on
Robot or pause key
Robot. Press the Start button
Start key in app to continue cleaning.
16
start the cleaning. Press the but-
in app to pause the
on Robot or the