PEUGEOT PV-R592 Manual De Usuario página 19

Tips:
1. It's necessary to switch on Map Save Mode in APP and save a
map before staring Room Cleaning.
2. Room Cleaning can only be used to customize the cleaning area
and not to isolate hazards. Robot may enter unselected areas
during cleaning. Please clear obstacles around the selected rooms.
• Zone cleaning
Robot will clean the zones
drawn in app.
Tips:
Zone cleaning can only be used to customize
the cleaning area and not to isolate hazards. The robot may move
outside of zone borders during cleaning.Please clear obstacles
around the drawn zones.
• Pin n go
Specify a point on the map, and Robot will
automatically get there and start partial
cleaning.
• Breakpoint resume
Switch on breakpoint resume in settings. When
the battery is low during the cleaning process,
Robot will automatically return to Charging
Base for charging. After the charging is
completed, it will continue cleaning from where
it left off.
Tips:
1. The robot will not resume cleaning in Do Not Disturb mode;
2. Recharging manually or moving Robot, it will not resume
cleaning.
• Restricted area create no-
go zones, No-mop zones and
virtual wall in map to prevent
robot from access certain
areas
19
B
C
A
D
B
C
A
D