Troubleshooting - Peugeot Pv-R592 Manual De Usuario

Troubleshooting

During the use of the product, in case of the
following conditions. It can be checked
and solved independently by users.
• Robot can't
connect to APP
• Unable to
install app
• The robot
cannot be
turned on
• The robot
can't charge
24
- The router user name
and password are incorrect
- The robot is not within the
network signal coverage of
the router
- Is the robot in the state to
connect WIFI?
- Not using 2.4G network
- APP doesn't support the
current router model device
- APP doesn't support the
current router model device
- The version of mobile
operating system is too low
- The power switch is turned
off. Low power. Temperature
is not suitable.
- The power switch is turned
off. Incorrect use of power
adapter Charging base not
connected to power supply
Configure the router network and
make sure that the "user name"
and "password"of the router are
correct
Ensure that the robot is within the
network signal coverage of the
router
Only when the robot is in the
state to connect WIFI, it can
connect properly. When the robot
is power on, press RECHARGE
& PARTIAL Cleaning 5S until
hearing 'Resetting WIFI'. WIFI LED
flashes blue, indicating that the
robot is in the state to connect
WIFI.
The robot does not support
5G network at present. Please
choose 2.4G
Please check the specific
supported models according to
the APP prompts
Please check the specific
supported models according to
the APP prompts
For mobile phones with IOS 9.0 or
above and Android 5.0 or above,
you can download and use the
APP.
Please turn the power switch on
the side of the robot to "I" state.
Please charging the robot. Please
use the robot in an environment
of 0-40°C.
Please turn the power switch on
the side of the robot to "I"
Please check and use the adapter
correctly
Make sure the power supply and
the charging base is connected
and charging base indicator lights
up