Reverse Function; Installation Instructions; Installation Preparation - Create Wind Industrial Manual De Instrucciones

ON/OFF
Turns the fan on or off completely, regardless of whether it has the light on or off.
FAN INTENSITY
Increase or decrease the rotation speed of the fan blades.
TIMER
Schedule automatic shutdown by choosing from the available options.

REVERSE FUNCTION

Change the direction of rotation of the fan blades. The winter function (turn to the right)
forces the hot air accumulated in the ceiling downwards and the summer function (turn to
the left) generates a breeze that cools the environment.
DISABLE SOUND
By pressing the sound off button you can silence the sounds that the fan makes when you
press any key on the remote control.
Controller pairing
1. Turn off the main light switch in the room where you have installed your fan for at least 10
seconds.
2. Turn the switch on and you will hear a beep, within 3 seconds, press and hold the on/off
button until you hear a beep.
3. If the pairing process is unsuccessful, repeat the above steps again after turning off the
wall switch for at least 1 minute.
I NSTAL L ATI ON PRE PAR ATI O N
• To avoid personal injury and/or
damage, ensure that the location
where the fan is to be hung allows
the blades to be at least 2.3 m from
the floor and 76 cm from the nearest
wall or other obstacle.
• Ensure that the mounting bracket
is properly secured to the ceiling
and is capable of supporting the full
weight of the fan.

INSTALLATION INSTRUCTIONS

min. 76 cm
min. 2.3 m
E NG L I SH
min. 76 cm
9