Hisense RVCLS144AB HSN Manual De Instrucciones página 11

Status indicators of the main unit
Indications Status
Robot is standby, cleaning,
Standby indicator
and return-to-charge after
is continuously on.
completion of cleaning.
Standby indicator
Sleep/shut down.
is o .
Standby indicator
Robot is faulty.
flashes quickly.
Standby indicator
Robot is charging.
flashes slowly.
Return-to-charge Robot is return-to-charge
indicator is
after completion of cleaning.
continuously on.
Return-to-charge Robot is return-to-charge
indicator flashes. due to low battery level.
Return-to-charge Robot is
indicator is o .
standby/cleaning/charging.
WiFi indicator is Robot is not network paired
o .
or disconnected from the
network.
WiFi indicator
Robot is waiting for network
flashes slowly.
pairing.
Wi-Fiindicator
Robot is networking.
flashes quickly.
Robot shows normal
WiFi indicator is
connection with the
continuously on.
network.
Electrolytic water
Electrolytic water module is
indicator is on.
operating.
Electrolytic water
Electrolytic water module
indicator is o . does not start.
EN-19
Solutions
/
/
See Troubleshooting
(Page 16) for fault solutions
/
/
/
/
/
/
/
/
/
/
Status indicators of the dust collector station
Indications Status
Dust collector station is not
powered.
O
Dust collector station is
standby.
Dust collector station has
been powered for a while.
White indicator is
Robot returns to the dust
continuously on.
collector station, starting to
collect dust automatically.
Dust collector station is
collecting dust.
Red indicator is
Dust bag is full.
continuously on.
Dust bag is not installed in place
Red indicator
or dust collector station is not
flashes.
tightly covered with its top cover.
Using App
NOTE:
If your home Wi-Fi name or password is changed, you will
need to re-establish connection with your robot vacuum.
App supports iOS 9.0 and above, Android 6.0 and above phone
1.
system versions, but Pad device is not accepted. Generally, the
phone system version may be checked by clicking "Settings-About
Mobile Phone" in the mobile phone.
2. This model does not support WEP encrypted router.
3. The network accessing configuration of the cleaner requires Wi-Fi
network of 2.4GHz frequency range, 5 GHz frequency range is not
currently compatible.
Do not configure network accessing under the charging state.
4.
Wi-Fi is mandatory for network accessing configuration of the
5.
cleaner, once the network accessing is configured successfully,
App may be operated in Wi-Fi/2G/3G/4G network environment
and the cleaner may be controlled remotely.
6. If your home WIFI password is changed, the cleaner will be
displayed o -line.
EN-20
Solutions
/
/
/
/
/
Please replace it with a
new dust bag.
Install the dust bag and
close the top cover tightly.