Blades Assembly; Connections Panel Assembly; Decorative Cover Assembly - Create Wind Flowood Manual De Instrucciones

BLADES ASSEMBLY

1. Place the blade support and screw each blade one by one until they are completely se-
cured. Do not overtighten the screws.
2. Then align with the blade support and the assembled blades, fit the support to the fan
motor, lining up the holes to be able to screw them.
3. Once the blades are mounted on the fan body, screw the screws back in, making sure they
are perfectly secured.

CONNECTIONS PANEL ASSEMBLY

• Attach the plate to the bottom of the fan by inserting the screw heads into the holes pro-
vided. Screw in the screws and then secure them.

DECORATIVE COVER ASSEMBLY

*Only for the model WITHOUT LIGHT
• Once the connection plate is assembled and secured, screw the decorative cover back to
the connection plate using the central screw.
E NGLI SH
13