Setting The Coffee Strength - Beem Basic Selection Manual De Instrucciones

EN

Setting the Coffee Strength

Keep pressing the button
display (19).
Weak coffee
Medium coffee
Strong coffee
The selected coffee strength is saved until a new coffee strength is set or the device has
been disconnected from the power supply for more than a minute.
Aroma Button
The brewing time can be extended with the aroma button
time will give the coffee a slightly more intense fl avour.
1. Press the aroma button
appears on the display (19).
2. Press the aroma button
Keep-Hot Function
The device has a keep-hot function which can be switched on and off using the button
We recommend switching on the keep-hot function when using the device with a glass jug.
The keep-hot function must be switched off when using the device with the thermal jug (6).
Press the
1. Prepare the coffee machine for making coffee with coffee powder or coffee beans and set
your desired number of cups, coffee strength etc.
2. Press the button
3. Start the brewing process (see the "Preparation" chapter). The hotplate remains switched
on after the end of the brewing process.
4. The keep-hot function switches off automatically after 40 minutes. If you want to stop the
keep-hot function prematurely, press the button
chosen preparation type).
A suitable glass jug is available via our website www.beem.de or from our customer service
department on request.
02049_DE-EN-FR-ES-IT_A5_V4.indb 30 02049_DE-EN-FR-ES-IT_A5_V4.indb 30
(26) until the coffee strength you want is shown on the
to extend the brewing time for the chosen number of cups.
again to switch the extended brewing time off again.
button if necessary, and
before the brewing process is started.
(24). The extended brewing
will go out on the display.
appears on the display (19).
(18) or (20) (depending on the
30
(23).
24.09.2018 15:51:08 24.09.2018 15:51:08