Adjusting The Guitar And Mic Input Sensitivity; Turning Off The Internal Speakers; Calling Up The Effect Stored In A Song (Patch Sync) - Boss Js8 Eband Manual De Instrucciones

Adjusting the Guitar and Mic Input Sensitivity

You can connect a mic to the JS-8's GUITAR/MIC IN jack and adjust the input sensitivity.
1. Press [MENU].
2. Select SYSTEM, and then press [ENTER].
3. Select SYSTEM SETTING, and then press [ENTER].
4. Set the INPUT GAIN.
INPUT GAIN
GUITAR Ideal input sensitivity when a guitar is connected
MIC Ideal input sensitivity when a mic is connected

Turning Off the Internal Speakers

You can output audio from the JS-8's LINE OUT jacks to an external playback device (Ex. component stereo system).
When doing so, you may want to turn off the JS-8's internal speakers.
Use the following procedure to switch off the internal speakers.
1. Press [MENU].
2. Select SYSTEM, and then press [ENTER].
3. Select SYSTEM SETTING, and then press [ENTER].
4. Set SPEAKER SW parameter to OFF.

Calling Up the Effect Stored in a Song (Patch Sync)

The effect patch stored in each song can be called up at the same time that you switch songs.
1. Turn the dial to select the desired song.
2. Press [MENU].
3. Select SONG INFO, then press [ENTER]
4. Press the right cursor button once to access the following
screen.
Specifies the Specifies the
effect patch that effect patch that
will be called up if will be called up if
SOLO is OFF. SOLO is ON.
Effect Patch Number
OFF Play using the current effect patch.
P*** Call up the specified preset effect patch.
U*** Call up the specified user effect patch.
.
If you press [MENU]
to select SET PATCH, the
currently selected effect
patch number will be
registered (assigned) to
PATCH SYNC.
The JS-8 features an effect especially designed for use Use
INPUT SENS to precisely adjust the input sensitivity.
You can disable (turn off ) the Patch Sync function in System
Settings.
1. Press [MENU].
2. Select SYSTEM, then press [ENTER].
3. Select SYSTEM SETTING, then press [ENTER].
4. Set PATCH SYNC parameter to OFF.
If this is disabled, the Patch Sync setting will be ignored, and
the currently selected effect patch will be used. (The effect
patch will not change when you switch songs.)
The Patch Sync function cannot be used for songs in USB
memory.
Convenient Functions
31