Convenient Functions; Advanced Editing Of Effect Parameters; Saving Effects - Boss Js8 Eband Manual De Instrucciones

6
Chapter

Convenient Functions

Advanced Editing of Effect Parameters

Press [EFFECTS].
Screen 1
Effect
patch
number
Use the dial to select
the effect category.
Screen 5 (Example: AMP)
Use the cursor
buttons and
Press [ENTER] to
dial to edit the
switch the effect
parameters.
on and off.

Saving Effects

1. After editing the effect, press [MENU].
2. Use the cursor buttons to select WRITE, and then press [ENTER].
Pressing [MENU] allows you to carry out the following proce-
dures.
MENU Category Description
ALL DELETE Deletes the all characters.
Deletes the character and shifts the charac-
DELETE
ters that follow to the left.
INSERT Inserts a blank space at the cursor position.
Use the left and
right cursor but-
tons and the dial to
name the effect.
20
Press the right
cursor button to
switch to Screen
2, 3.
Select the effect
patch you want
to edit here.
Press the cursor
button to access
additional param-
eters for the selected
effect.
Press [MENU],
then select WRITE
to save the edit.
Select the effect
patch number you
want to save your
changes to.
Press [ENTER] to save the
effect to the selected ef-
fect number.
Screen 2
Screen 3
Screen 4
Move the cursor Use the dial
to the effect that to switch
you want to edit. the selected
effect on and
off.
Switching effects with PATCH SELECT before you save an
edited effect will cause the edited content to be lost.
To Copy an Effect Patch
Call up the effect patch you want to copy, then merely
save that effect patch as it is to the desired effect patch
number.
Press the right
cursor button to
switch to Screen 4.
To adjust the sound,
move the cursor's posi-
tion with the cursor
buttons and dial.
Pressing
[MENU] (p. 21)
enables various
editing procedures.
Press [ENTER]
to switch to the
settings screen for
the selected effect
(Screen 5).
(Example) AMP
ON:
OFF: