Boss JS8 eBand Manual De Instrucciones página 30

Convenient Functions
ROTARY parameter list
Parameter
This parameter adjusts the SPEED SELECT of
RATE SLOW
rotation when set to "SLOW. "
This parameter adjusts the SPEED SELECT of
RATE FAST
rotation when set to "FAST. "
DEPTH
This sets the richness of the effect.
This parameter changes the simulated
SPEED SELECT
speaker's rotating speed.
UNI-V parameter list
Parameter
RATE
This sets the speed of the effect.
DEPTH
This sets the richness of the effect.
LEVEL
This sets the volume level of the effect.
PAN parameter list
Parameter
RATE This sets the speed of the effect.
DEPTH
This sets the richness of the effect.
Adjusts the sound character of the volume
WAVE SHAPE
level changes imparted with the pan effect.
About the RATE Parameter in ROTARY,
UNI-V, and PAN Effect
When set to BPM, the value of the RATE parameter is set
according to the value of the "EFFECT TEMPO" (p. 30) speci-
fied for each patch. This makes it easier to achieve effect
sound settings that match the tempo of the song.
28
EQ parameter list
Parameter
OFF/ON
Turns the EQ OFF/ON.
LO MID GAIN
LO G
These adjust
the volume of the
respective EQ
bands.
Specify the center
frequency of the
mid bands with
"LO MID FREQ"
LO MID FREQ
and "HI MID FREQ."
LEVEL
Adjusts the volume before the equalizer.
Adjusts the width of the area affected by the
LO-MID Q
EQ centered at the "LO MID FREQ. " Higher
values will narrow the area.
Adjusts the width of the area affected by
HI-MID Q
the EQ centered at the "HI MID FREQ. " Higher
values will narrow the area.
This sets the frequency at which the low cut
LO CUT
filter begins to take effect. When "FLAT" is se-
lected, the low cut filter will have no effect.
This sets the frequency at which the high
cut filter begins to take effect. When "FLAT"
HI CUT
is selected, the high cut filter will have no
effect.
NOISE SUPPRESSOR parameter list
Parameter
OFF/ON Turns the NOISE SUPPRESSOR OFF/ON.
This adjusts the effect in response to the
level of noise. A value of 0 switches off the
noise suppressor.
THRESHOLD
Setting this higher than necessary may
cause no sound to be produced when
the guitar is played at low volume.
Adjusts the time from when the noise sup-
RELEASE
pressor begins to function until the noise
level reaches "0. "
HI MID GAIN
HI G
Frequency
HI MID FREQ