Sony TC-K511S Manual De Instrucciones página 46

46
Maintenance
Cleaning the Heads Tape
Path
Clean all surfaces over which the tape
travels after every ten hours of operation to
guard against:
— low-quality sound
— adecrease in sound level
— excessive wow, flutter or drop-out
-—— incomplete erasure
— impairment of recording function
To obtain high-quality recorded sound,
cleaning before every recording is
recommended.
1 Press # to open the cassette holder.
Grasp the front holder on both sides
and gently lift to remove it.
2 With the unit turned off, wipe the
heads, the pinch roller and the
capstan with a cotton swab slightly
moistened with alcohol or a
commercially available cleaning fluid
for tape decks.
Fig. #4
a) Capstan
b) Recording head
¢) Playback head
d) Erasing head
e) Pinch roller
3 Replace the cassette holder.
Do not insert a cassette until the cleaned
areas are completely dry.