Positioning The Charger; Wall Mount Installation - Webasto ProCore Edge 9 Guia De Instalacion

ProCore Edge North America

Positioning the Charger

CAUTION
Take precautions to avoid injury
when moving the charger.
Use appropriate material handling
aids (e.g., a pallet truck) to move the
charger into position. Webasto
recommends using a hoist with
straps or chains wherever possible,
especially when the charger is raised
above ground level.
Lifting eye-bolts (M8 thread) can
be attached to four locations on the
top panel of the charger to aid the
process. Remove the filler screws
with a 4mm hex key before attaching
the M8 lifting eye-bolts.

Wall Mount Installation

Check with professional installation
personnel to determine proper
mounting techniques for all wall types.
Fig. 4 – Charger on
Wall Mount Hanger
31241-76-0104
M8 Lifting Eyebolts
Fig. 2 – Attaching Points for M8
Lifting Eyebolts, Top Pen View
Fig. 3 – Charger, Wall Mount Hanger,
Bottom Bracket and M5 Screw
Page 8 of 12
Installation Guide
M6 Panel Screws
(2021-2022)
M5 Panel Screws
(2023 and later)
Fig. 5 – Bottom Bracket
Mounted to Charger
Webasto Charging Systems, Inc.