Select User; Attaching The Pressure Cuff - GERATHERM active control+ Manual Del Usuario

How to operate the unit
5. Repeat steps 2 and 3 to set the [HOUR] and [MINUTE].
6. After the [MINUTE] is set, the LCD will display all the settings you have done and then turn off.

Select User

1. When the monitor is off, press and hold "START" button to enter user setting mode.
The user ID will blink.
EN
2. Then press "MEM" button to select the user ID between User 1 and User 2.
3. After selecting the suitable user ID, press "START" button to confirm. Then the LCD will
turn off.

Attaching the pressure cuff

1. Before taking a blood pressure measurement, remove any jewellery, such as
watches and bracelets, on the arm that is to be used for measuring.
Note: If your doctor has diagnosed poor circulation in your left arm, use the right arm.
44