boso medicus prestige Manual Del Usuario página 29

How to record blood pressure values in your record card
and recall the „average" value:
Record the measured values into the record card that
accompanies your unit as follows:
Enter each individual reading.
Recall the average value after 30 measurements and
enter it in its designated column.
Stored measurements can be recalled by briefly
pressing „M" in the time display mode.
The average value of all stored results (Systole and
Diastole) appears. In the „Pulse" display the number of
the retained measurements flashes.
If there is no measurement stored in the memory,
the display for the number of measurements taken
AOO
flashes „ ". The systole and diastole displays each
O
show „ ".
Average value
Systole
mmHg
Average value
Diastole
mmHg
Number of
measurements
29