ECOVACS ROBOTICS DEEBOT 900 Manual De Instrucciones página 14

3. Operating and Programming
5
Charge DEEBOT
Note: When DEEBOT completes the cleaning cycle or when battery
power gets low, DEEBOT automatically returns to the Docking Station
to recharge itself. DEEBOT can also be sent back to the Docking
Station at any time by using ECOVACS App or by pressing the AUTO
Button on the robot for 3 seconds.
7
Pause
Note: The robot's Control Panel stops glowing after the robot is paused
for a few minutes. Press the AUTO Mode Button on DEEBOT to wake
up the robot.
14
EN
6
Start
8
Power OFF
Note: When DEEBOT is not working, it is recommended to keep it
switched ON and charging.