Home Decorators Collection 52476 Guía De Uso Y Mantenimiento página 13

Operating - Your Fan and Remote Control
Remote Control - Your fan is equipped with a remote control to operate
the speed and lights of your new ceiling fan.
NOTE: On start up your ceiling fan will oscillate back and forth.
This is NORMAL OPERATION for DC ceiling fans as it goes through
its calibration cycle. The fan is NOT DEFECTIVE.
Power fan + light:
Press and release "ALL" button to turn the fan and light on or off.
Power Uplight:
Press and release to turn uplight on or off.
Light level:
Press and release the "+" button to increase the light level.
Press and release the "-" button to decrease the light level.
Power Downlight:
Press and release to turn downlight on or off.
LED Panel display:
Displays temperature and fan/light settings.
Power fan:
Press and release the button to turn the fan on or off.
Fan speed:
Press and release the "+" button to increase the fan speed.
Press and release the "-" button to decrease the fan speed.
Breeze mode:
Press the button to enable Breeze; this will change your fan randomly,
simulating a relaxing breeze. Holding the Breeze button for 3 seconds will
cancel this function.
Thermostat Temperature:
This setting allows the fan to automatically turn on and off at a previously
set room temperature.
"+" - Press 1 time to adjust the set temperature + 1°, press and hold to
raise the set temperature multiple degrees.
"-" - Press 1 time to adjust the set temperature - 1°, press and hold to lower
the set temperature multiple degrees.
Digital display shows the set temperature when + or - is pressed.
Timer:
While the fan is on, press "2 HR": turns on a 2-hour run timer.
While the fan is on, press "4 HR": turns on a 4-hour run timer.
While the fan is on, press "8 HR": turns on a 8-hour run timer.
Fan direction:
NOTE: The fan must be on and rotating prior to pressing the winter
or summer button. The fan will not reverse direction if the fan is
not moving.
Speed setting for warm or cool weather depends on factors such as the
room size, ceiling height, number of fans and so on.
Hold the SUMMER button for 3 seconds to rotate fan forward.
Hold the WINTER button for 3 seconds to rotate fan in reverse.
Light Settings:
Select Uplight or Downlight by pressing and releasing the uplight or
downlight button.
MANU: Press and release to change the color of the selected light to the
next color in the programmed sequence.
AUTO: Press and release to set the light into fade mode to automatically
cycle through the light's color sequence.
TEMP: Press and release to cycle through the preset color temperature
settings of the light from 2700K (warm white) to 6500K (daylight deluxe).
LED Panel Display
Power Fan (only)
Fan speed
Breeze mode
Thermostat temperature
Timer
Fan direction
Color temperature
Summer - (Forward) A downward airflow creates a
cooling effect. This allows you to set your air conditioner
on a higher setting without affecting your comfort.
Winter - (Reverse) An upward airflow moves warm air off
of the ceiling. This allows you to set your heating unit on
a lower setting without affecting your comfort.
13
Please contact 1-800-986-3460 for further assistance.
Power
Fan+Light
Power
Uplight (only)
Light level
Power
Downlight (only)
HOMEDEPOT.COM/HOMEDECORATORS