Utilitech RAD 30-65IN Manual De Usuario página 9

ASSEMBLY INSTRUCTIONS
DRYWALL (only) INSTALLATION
Attach Wall Plate (A) with the help of Nails (GG) to Drywall.
3. Position the wall plate (A) on your wall and secure
a nail (GG) in BOTH OUTER holes.
! Important: The wall plate (A) must be level when
securing the second nail (GG).
Note: Use a bubble level (SS) to level the wall plate-
(A).
Hardware Used
GG
SS Bubble level
Hammer (not included)
!
Important: Alternately installing the remaining 18
nails (GG) from side to side.
!
CAUTION: Twenty (20) nails (GG) total must be used
in the wall plate (A).
Single Wood Stud Installation
4. Use a stud finder (not included) to locate wood
studs. Mark the edge, and center location.
Nails x20
x1
3
GG
A
1 OUTER HOLE
3a
4
9
SS
A
2 OUTER HOLE
GG
SS
A
GG