4.Steering wheel assembly
Match two connectors of the wires from steering wheel and steering column,
align the steering wheel with steering column, press two pins on steering
wheel and insert them into the holes on steering column.
5. Mirror assembly
Align the hook of mirror with the corresponding opening on the car body, insert
and push it into place.
08
Steering wheel
Mirror
6.Battery connection
Before assembling the seat, please connect two red clip locks of two wires.
Then assemble the seat, align the hole on the back of the seat with the hole
on the back of the car, fix them with a screw.
FUSE
This car has a auto-reset fuse, if the car stops suddenly during driving, it is
mainly caused by instantaneous current exceeds, which makes the fuse to
trip. Then just stop operating for about 8 seconds, and this fuse can be reset.
Then turn on the power switch again. In order to avoid the fuse tripping and
cutting off power supply, please pay attention to the following matters.
This product can't be overloaded, the maximum load is 30 kg.
Don't drag anything behind the product.
Don't let the water or other liquid into the batteries and other electrical
components.
Don't change the circuit system and structure of the product.
SECURITY WARNING
1.The installation and charging of vehicle should be under adult supervision at
all times.
2.This product is limited to the children from 37 to 95 months, 30 kg weight
limit, please do not overload.
09