Hisense RF793N4SASE Manual De Operación página 52

UNBIND ALL PAIR APPLIANCE
By activating this function, the appliance will
be removed from all paired app user accounts.
Step 1: Set the appliance to normal operation.
Touch the Wi-Fi icon for approximately 3
seconds. You entered network connection menu
when ' -- ' appears in the display.
Step 2: Touch the Fridge key to select ' 88 ' within
60 seconds.
Step 3: Touch the Wi-Fi icon to confirm the
selection mode to realize unbinding.
Step 4: After the device is unbound, it will
automatically enter the distribution network state,
the Wi-Fi icon flashes, and the distribution network
time is up to 5 minutes.
The control panel will light up when the door is
open or you touch any button.
The light will go off without touching any button
or the doors have been closed for one minutes.
When the refrigerator is powered on, all the
icons of the control panel will light up for 3
seconds, and a buzzer sounds. The Child Lock is
off.And the temperature setting reverts back to
the previous setting.
As the application continues to be upgraded,
please refer to the actual display interface.
User manual:
Transmitting frequency
allowed transmitting power in the operating
frequency band (s): 2040-2483.5MHz,less than
or equal to 20dbm.
This equipment
operated with minimum distance 20cm between
the radiator & your body.
21
band(s) and
should be installed
max
and