Hisense RF793N4SASE Manual De Operación página 50

If you have set the temperature type to Fahrenheit,
the temperature settings cycle from 46°F to 36°F.
46°F
45°F
36°F
displays 2°C(or 36°F).Super Cool automatically
switches off after 3 hours,and the refrigerator
temperature setting will revert back to the previous
setting.When Super Cool functiong is on,you can
touch the"Fridge" to switch it off.
the "Eco" button,"Eco" function will be activated,
and "Super Cool" mode will be off.
If you have set the temperature type to
Fahrenheit, the temperature settings cycle from 7°
F to -11°F.
7°F
-11°F
" " will be illuminated, the freezer temperature
setting displays -24°C(or
Super Freeze can quickly lower the temperature and
freeze your food faster than usual. This can retain
more of the vitamins and nutrition in fresh food and
keep your food longer. Super Freeze automatically
switches off after 52 hours, and the freezer
temperature setting will revert back to the previous
setting. When the Super Freeze function is on, you
can touch "Freezer" to switch off the Super Freeze
function.
The Super Freeze is used to perform pre-freezing and
fast freezing in sequence of Freezer compartment
This function accelerates the freezing of fresh food
and,at the same time,protects foodstuffs already
stored from undesirable warming.
To freeze fresh food activate
the Super Freeze function at
least 24 hours before placing
the food to complete pre-freezing
19
44°F
38°F
37°F
6°F
-10°F
-11°F).
"Eco" button,"Eco" function will be activated,and
"Super Freezer" mode will be off.
When the Child Lock is on,the dispenser will not
work.When the Child Lock is off,you can press the
"Cubed"or "Crushed" option to choose the type of
ice to be dispensed,and press the "Water" button
will activate the water mode.If you choose the
function of Cubed,the "
choose the fuction of Crushed the "
illuminated,and the "
when Water function be choosed.
You can touch this button to turn Energy Save
mode on and off. When you turn Energy Save on,
the Eco icon " " lights.
The temperature of the fridge is automatically
switched to 6°C(or 43°F) and the freezer to -17°C
(or 1°F) .If Energy Save is off, the icon"
and the temperature setting will revert back to the
previous setting.
The state of the water filter is calculated by the
main control board and transmitted to the
display panel.The first time the power is
switched on and the water enters the filter, the
filter state is calculated at 99%. When the water
filter state drops to 15%, the icon "
When the filter state reaches 10%, the icon "
will flash, The user needs to replace the filter and
long press the Energy Save Button for 3 seconds
to reset the water filter
state.The filter state will then be re-calculated to
99%.
Demo mode is for store display,and it prevents the
refrigerator from generating cool air. In this Cooling
off Mode, the refrigerator may seem like it is working
but it will not make cool air. The indicators on the
control panel will show "OF". To cancel this mode,
press and hold "Alarm" and "℉/℃" keys at the
same time for 3 seconds and the buzzer gave a
long sound.
" icon will be illuminated,
" icon will be
" icon will be illuminated
" will go off
" is lit.
"