Maintenance and Service
Cleaning the deodorization
filter/PM1.0 filter (Optional)
1. Refer to 'How to Remove the Filter' when
removing the filter.
2. Grab the handle on the filter case holder and pull
in the direction of the arrow to remove the PM1.0
filter.
• Do not remove the filter case holder and the
intake grille.
3
3. As shown in the figure, pull on the handle and
remove the deodorization filter.
4
2
28 Indoor Unit
4. Wash the filter after checking the washing
method in 'Filter Information'.
5. After washing, reinstall the deodorization filter
and the PM1.0 filter to their original positions,
1
respectively.
• When installing the PM1.0 filter, insert the hook
in the square hole.
2
① PM1.0 filter
② Handle
③ Filter case holder
④ deodorization filter
⑤ Hook
⑥ Square hole
!
For safety, turn off the main power switch.
NOTE
• The feature may be changed according to the
type of model.
• Some functions may not be supported, depending
on the model.
WARNING
5
6