LG UM42F Manual Del Propietário página 11

Using Wireless Remote Control
You can operate the air conditioner more conveniently with the remote control.
NOTE
• Depending on the product type, some functions may not be available and displayed.
• Some products don't receive the wired signals.
• When using the simultaneous operation system, the system will operate approximately 1 - 2 minutes after
pressing the remote controller button.
• The displayed temperature can be different from the actual room temperature if the remote controller is
installed somewhere exposed to direct sunlight or is nearby a heat source.
• Depending on the product, wireless and wired remote control are optional or basic.
• Heating Mode is not available for Cooling only Models.
• Buttons may be changed according to the type of model.
Display
Button
Screen
-
AIR PURIFY
PLASMA
VANE ANGLE
AIR FLOW
MODE
-
JET MODE
JET COOL
FAN SPEED
-
FUNC.
-
ROOM TEMP
SLEEP
ON
-
OFF
-
-
SET/CLEAR
-
RESET
-
Description
Used to turn on/off the unit.
Used to start or stop the air purification function.
Used to start or stop the plasma-purification function.
Used to set each vane angle.
Used to set airflow.
Used to select the room temperature.
Used to select the operation mode.
To change room temperature quickly.
To adjust the fan speed.
Used to set or clear additional function.
To adjust the air flow direction vertically or horizontally.
Used to check the room temperature.
Used to set the time for the sleep function.
Used to set the start time.
Used to set the stop time.
Used to set the timer. Used to adjust the brightness.
Used to check the room temperature. (If it is not time
adjust mode)
Used to set/clear the timer. Used to set the current
time. (hold button for 3 seconds)
To initialize the remote control settings.
Operating Instructions
Owner's Manual 11